Automazione

Product Description The PhidgetAnalog 4-Output Produces a voltage over -10V to +10V. This voltage will be asserted up to +-20mA. An error will b...

      The 4-20mASensors can be connected to and powered by the provided terminals on the 4-20mA Adapter board. The 1132 will measure the current ...

The PhidgetInterfaceKit 0/0/4 allows you to control high power devices such as incandescent light bulbs, fans, and pumps by electronically switchin...

  The 1133 measures sound across a very wide range, with a frequency range of 100Hz to 8kHz and pressure level from 50dB to 100dB.   Product Specif...

The Solid State Relay is used to switch up to 2.5 Amps at up to 40 Volts DC, or 28 Volts AC.   The SSR board is controlled by a digital output on ...

The 1121 provides an interface to non-Phidgets resistance sensors such as: Force-Sensing Resistors (FSR), light sensors, thermistors (heat sensors...

The 1106 reads 0 when no force is applied. As force increases on the circular button the value increases towards 1000.   It is intended as a user...

The PhidgetAdvancedServo 8-Motor allows you to control the position, velocity, and acceleration of up to 8 RC servo motors. It requires a 6-15VDC ...

The Phidget GPS provides the longitude and latitude of the board's position in signed decimal degree format. The position accuracy (best case) is 2...

There are so many projects that require motor position control that Phidgets decided to make an inexpensive, reliable option. The ENC4109 is exactl...

This stainless steel probe type thermocouple is easy to install and plugs into a Phidgets thermocouple board. Measure -40 to 400°C with this stainl...

The 3851 Enclosure is designed to protect the following boards while still giving you access to the USB port through an opening in the enclosure: ...

The PhidgetSpatial Precision 0/0/3 is a 3-axis accelerometer that can measure up to ±8g of acceleration in each axis, and has high precision when m...

        With its paper-thin construction, flexibility and force measurement ability, the Thin Force sensor can measure force between almost any tw...

Bridge-based sensors are are a common type of resistive sensor that produce a very small voltage drop. Load cells, strain gauges, pressure sensors,...

Most of the sensors sold at Phidgets are simple 0-5V devices that can be read directly from a VINT port. But sometimes, you need a special sensor, ...

Note: The 1041_0B is identical to the 1041_0, except that it comes pre-assembled in a plastic shell enclosure and you have the option of which leng...

  Product Description The 3805 Enclosure is designed to protect the Rev 2 version of the 1023 – PhidgetRFID while giving you access to all terminal...

    Product Features Additional cables for the 1030 – PhidgetLED-64 4-Conductor, with connectors on both ends   Note: Cut the cables in...

The PhidgetEncoder HighSpeed connects to any typical two-bit optical encoder and can return up to 500,000 counts per second. Specifically it reads...

 Thermocouples are widely used to measure extreme temperatures impossible to measure with other types of sensors. J, K, E and T thermocouples are d...

The 1111 detects changes in infrared radiation that occur when there is movement by a person (or object), which is different in temperature from t...

For applications that require a ton of outputs, this module is the one you're looking for. With sixteen PWM-enabled relay outputs, it can be used t...

The Wireless VINT Hub is the easiest way to use Phidgets in locations far away from a computer. As long as there's a local WiFi signal and a nearby...