Display & LED/Serial LCD / GLCD

STN LCD Display with backlight. Hitachi HD4480 compatible. Datasheet PDF

The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended for as a cell phone screen. This one is mounted ...

LED 128×64 Display module is an OLED monochrome 128×64dot matrix display module with Grove 4pin I2C Interface .The characteristics of this displ...

Display - 16 characters per row, 2 rows Voltage - 5v only required Current - 40mA typ. with backlight on Modes - I2C or 9600 baud Serial Keypad - ...

Overview The I2C and serial display driver provides easy operation of a standard 20 x 4 or 16 x 2 LCD Text display. It requires only a 5v powe...

Overview The I2C and serial display driver provides easy operation of a standard 20 x 4 or 16 x 2 LCD Text display. It requires only a 5v power su...

This new Adafruit Pi Plate makes it easy to use an RGB 16x2 Character LCD. We really like the RGB Character LCDs we stock in the shop. (For RGB we ...

Overview The I2C and serial display driver provides easy operation of a standard 20 x 4 or 16 x 2 LCD Text display. It requires only a 5v power su...

This new Adafruit shield makes it easy to use a 16x2 Character LCD. The 16x2 Character LCD is NOT, repeat, NOT, included We really like the range ...

The SparkFun Micro OLED Breakout Board breaks out a small monochrome, blue-on-black OLED. It's “micro”, but it still packs a punch – the OLED displ...

MuIN LCD Board is a multi-interface LCD display controller compatible with HD44780 chipset and similar. MuIN LCD doesn't need to be programmed !...

Grove - OLED 1.12'' is a 16 color grayscale 96×96 dot matrix OLED display module with Grove compatible 4pin I2C interface.Grove - OLED 1.12" is co...

This is the serial backpack for graphic LCDs. The Graphic LCD Serial Backpack interfaces to either our 160x128 pixel “Huge” Graphic LCD, or the sm...

MOD-OLED-128x64 is low cost, low power, high contrast LCD display with UEXT connector. You can control it via I2C. The power supply required is on...

MuIN LCD Board is a multi-interface LCD display controller compatible with HD44780 chipset and similar. MuIN LCD doesn't need to be programmed !...

This easy to assemble kit gives you all the parts necessary to assemble a serial 16x2 character LCD display. By sending commands over a serial p...

The SparkFun Large Digit Driver is a chainable backpack controller that can be soldered directly to the back of our large 6.5" 7-segment displays....

This is the SparkFun Pi Wedge, a small board that connects to the 40-pin GPIO connector on the Raspberry Pi and breaks the pins out to breadboard-f...

Adding a character display to your project or computer has never been easier with the new Adafruit USB or TTL serial backpack! This custom-designed...

The 1.3" SHARP Memory LCD display is a cross between an eInk (e-paper) display and an LCD. It has the ultra-low power usage of eInk and the fast-re...

The Grove - Triple Color E-Ink Display 2.13'' is a screen that can still be displayed after power off, we call it E-Paper(electronic paper) or E-I...

The Grove - Triple Color E-Ink Display 1.54'' is a screen that can still be displayed after power off, we call it E-Paper(electronic paper) or E-I...

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RG...

The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RG...