Salta il contenuto


SKU 502238

A13-OLinuXino-MICRO - Single-board Linux computer with ALLWINNER A13 CORTEX-A8 @1000 Mhz

Prezzo originale €42,58 - Prezzo originale €42,58
Prezzo originale
€42,58 - €42,58
Prezzo attuale €42,58

Tutti i prezzi sono IVA inclusa

Solo 2 disponibile
Richiesta Sconto per Quantita' e Informazioni

A13-OLinuXino is a low-cost single-board Linux computer in a very compact form. It uses the very first Cortex A8 processor available in the eLQFP176 package, produced by Allwinner Technology Inc A13.


  • A13 Cortex A8 processor at 1GHz, 3D Mali400 GPU
  • 256 MB RAM (128Mbit x 16)
  • 5VDC input power supply with own ICs, noise immune design
  • 1 USB host
  • 1 USB OTG which can power the board
  • SD-card connector for booting the Linux image
  • VGA video output
  • LCD signals available on connector so you still can use LCD if you disable VGA/HDMI
  • Audio output
  • Microphone input pads (no connector)
  • 1 User key
  • 4 Mount holes
  • UEXT connector for connecting additional UEXT modules like Zigbee, Bluetooth, Relays, etc
  • GPIO connector with 68/74 pins and these signals:
    • 17 for adding NAND flash;
    • 22 for connecting LCDs;
    • 20+4 including 8 GPIOs which can be input, output, interrupt sources;
    • 3x I2C;
    • 2x UARTs;
    • SDIO2 for connecting SDcards and modules;
    • 5 system pins: +5V, +3.3V, GND, RESET, NMI
  • Dimensions: 100 x 85 mm (3.950x3.350'')
  • Optional low-cost 7" LCD with touchscreen






  • There is only 1 USB host on the board, how can I connect my USB mouse and USB keyboard simultaneously?
  • You should use external USB hub.
  • What software is available for the board?
  • The software development changes very rapidly. So far we have reports for a number of Linux distributions working properly with the MICRO, please visit the WIKI and the GitHub pages of A13-OLinuXino-MICRO to find suitable distributions;also you might want to look in the forum for additional help
  • I bought A13-LCD7-TS but when I connect it to the A13-OLinuXino I receive no image on the display. What do I do wrong?
  • The default A13-OLinuXino image is set for a VGA display and 800x600 resolution. To use LCD with A13-OLinuXino you need to upload a new image with the appropriate settings. The download links for the images may be found in the wiki article for A13-OLinuXino:
  • What is the operating temperature range of A13-OLinuXino?
  • The board works in the commercial temperature range 0+70C
  • Where can I find the Android image for the A13-OLinuXino-MICRO?
  • At the moment we haven't tested Android booting from a SD card. Android from a SD card is currently not officially supported. However, note that there are people who are reporting success at getting it to run - head to the Olimex forums for more recent info.