TMP4106_0 - K-Type Probe Thermocouple 11cm
Tutti i prezzi sono IVA inclusa
This stainless steel probe type thermocouple is easy to install and plugs into a Phidgets thermocouple board.
Measure -40 to 400°C with this stainless steel K-type thermocouple probe. Since the end of the thermocouple is enclosed, it is ideal for measuring liquids. The thermocouple junction is ungrounded, meaning it is isolated from the outer sheath and more resistant to environmental noise.
Note: Beyond the 11cm tip, this thermocouple is not waterproof.
Connection
This thermocouple connects quickly and easily to any of the following Phidget thermocouple interfaces:
- 1051 - PhidgetTemperatureSensor 1-Input.
- 1048 - PhidgetTemperatureSensor 4-Input.
On the 1051, connect the white thermocouple wire to (-) terminal block and the red wire to the + terminal block.
On the 1048, connect the white wire to G and the red wire to an input terminal block (numbered 0 to 3).
For more information on thermocouples, visit the Thermocouple Primer.
Sensor Properties
Sensor Type | Thermocouple |
Temperature Sensor
Thermocouple Type | K |
Probe Type | Immersion (Ungrounded) |
Ambient Temperature Min | -40 °C |
Ambient Temperature Max | 400 °C |
Ambient Temperature Min (Momentary) | -40 °C |
Ambient Temperature Max (Momentary) | 1000 °C |
Ambient Temperature Error Max | 3.3 °C |
Physical Properties
Cable Length | 1 m |
Probe Diameter | 3.2 mm |
Cable Diameter | 3 mm |
Probe Material | Stainless Steel |