Cataloghi

Features of the MB1200, XL-MaxSonar-EZ0, include centimeter resolution, the widest and most sensitive beam pattern of any unit from the XL-MaxSonar...

Features of the MB1360, XL-MaxSonar-AEL0, include centimeter resolution, the widest and most sensitive beam pattern of any unit from the XL‑MaxSona...

Features of the MB1240, XL-MaxSonar-EZ4, include centimeter resolution, the highest noise tolerance and narrowest beam width of any sensor in the X...

Features of the MB1210, XL-MaxSonar-EZ1, include centimeter resolution, a great blend of sensitivity as well as side object rejection, short to lon...

Features of the weather-resistant MB7363, HRXL-MaxSonar-WRLS, include millimeter resolution, short to long-distance detection, range information fr...

Features of the weather-resistant MB7383, HRXL-MaxSonar-WRLST, include millimeter resolution, short to long-distance detection, range information f...

Features of the MB1260, XL-MaxSonar-EZL0, include centimeter resolution, the widest and most sensitive beam pattern of any unit from the XL-MaxSona...

Features of the MB1320, XL-MaxSonar-AE2, include centimeter resolution, an excellent compromise between sensitivity and side object rejection, shor...

Features of the MB1230, XL-MaxSonar-EZ3, include centimeter resolution, a narrow beam as well as excellent side object rejection, short to long dis...

This 4-wire cable is a little over 100mm / 4" long and fitted with JST-SH female 4-pin connectors on both ends. Compared with the chunkier JST-PH t...

The Touch Board from [Bare Conductive](http://www.bareconductive.com/about/) is an easy-to-use Arduino@Heart board that gives you the ability to tu...

Features of the MB1403, HRUSB-MaxSonar-EZ0, include millimeter resolution, the widest and most sensitive beam pattern of any unit from the HRUSB‑Ma...

Features of the MB1261, XL-MaxSonar-EZL1, include centimeter resolution, a great blend of sensitivity as well as side object rejection, short to lo...

FireBeetle 2 ESP32-E, specially designed for IoT, is an ESP-WROOM-32E-based main controller board with dual-core chips. It supports WiFi and Blue...

This 4-wire cable is a little over 150mm / 6" long and fitted with JST-SH female 4-pin connectors on one end and premium Dupont male headers on the...

This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected bac...

These are 6\" long jumper wires terminated as male to female. Use these to jumper from any male or female header on any board. Multiple jumpers can...

This DC power jack/connector is just like the other one that we carry except that it\'s terminated with breadboard-friendly pins instead of wide so...

Rotary encoders can be used similarly to potentiometers. The difference being that an encoder has full rotation without limits (It just goes round ...

The MyoWare® 2.0 Reference Cable is meant as an extension for the [MyoWare 2.0 Muscle Sensor\'s](https://www.sparkfun.com/products/18977) reference...

The SparkFun WM8960 Audio Codec Breakout is a low-power, high-quality stereo codec with 1W Stereo Class D speaker drivers and headphone drivers. Th...

This optical rotary encoder connects directly to a Phidgets Encoder Interface.