Cataloghi

These shrouded, 5-pin JST XH-style male connectors have right-angle leads. They can be used with female JST XH-style connectors, and they also wor...

These shrouded, 5-pin JST XH-style male connectors have straight leads. They can be used with female JST XH-style connectors, and they also work w...

These shrouded, 2-pin JST XH-style male connectors have extended right-angle leads and match the female connector on the 2-pin female XH-style cabl...

This pack contains everything you need to add up to three female Futaba J connectors — the connectors found on many Futaba servos — to custom cable...

This pack contains everything you need to add up to three female JR connectors — the connectors commonly found on generic RC servos — to custom cab...

These shrouded, 2-pin JST XH-style male connectors have right-angle leads and match the female connector on the 2-pin female XH-style cable, and th...

These shrouded, 2-pin JST XH-style male connectors have straight leads and match the female connector on the 2-pin female XH-style cable, and they ...

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. ...

IDC socket 2.54mm 6-pin (with strain relief clip) for use with 2×3-pin shrouded male header. These connectors can be crimped onto ribbon cable to m...

This is a standard PCB-mountable barrel-type jack for DC power adapters with 2.1 mm center holes. This is a standard PCB-mountable barrel jack for ...

Red shorting block (removable jumper) designed for 0.1" (2.54 mm) male header pins. These shorting blocks make great removable jumpers and fit stan...

Black shorting block (removable jumper) designed for 0.1" (2.54 mm) male header pins. These shorting blocks make great removable jumpers and fit st...

Yellow shorting block (removable jumper) designed for 0.1" (2.54 mm) male header pins. These shorting blocks make great removable jumpers and fit s...

Blue shorting block (removable jumper) designed for 0.1" (2.54 mm) male header pins. These shorting blocks make great removable jumpers and fit sta...

This Micro-USB cable is 6 ft (1.8 m) long and is terminated on one end by a Type-A USB plug and on the other by a Micro-B USB plug. This cable wor...

This Mini-USB cable is five feet long (1.5 m) and has a male Type-A connector on one end and a male Mini-B connector on the other. This cable work...

This Micro-USB cable is extremely thin (2mm diameter), light, and flexible, which makes it easier to use than bulkier cables that tend to take up m...

This Mini-USB cable is extremely thin (2mm diameter), light, and flexible, which makes it easier to use than bulkier cables that tend to take up mo...

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that po...

This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector is keyed so that power ca...

This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded...

This 12-inch (30-cm) cable has 28 AWG wires and a 3-pin female JST ZH-style connector that mates with the 3-pin connector on Sharp GP2Y0A51 analog ...

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have matin...

This male JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that ...