Cataloghi

This encoder can measure rotation at speeds of up to 3000 RPM and plugs into a Phidgets Encoder Interface.

This encoder interface can measure 500,000 quadrature cycles per second at 125 Hz.

Detect several solid objects up to 10m away in a wide sensing range, or use this Phidget as an ultrasonic range finder.

Reads one 4-20mA, frequency output, PNP/NPN or 5V sensor, and provides 12 or 24V without an external supply.

Add 4 isolated active-high digital inputs to your hub at the cost of only one VINT port.

This DC motor has a 4.25:1 gearbox, a rated speed of 588 RPM and rated torque of 5.1 Kg·cm.

These waterproof connectors allow you to attach 2 cables together while protecting the connection from the elements.

Add four 5V PWM-enabled digital outputs to your hub with this simple and affordable module.

This VINT Hub has six VINT ports.

Connect up to four K, J, E or T type thermocouples to this Phidget to measure the temperature of the air or an object.

Stationary support for linear shaft. Mounts at parallel to shaft and tightens via bolt.

Stationary support for linear shaft. Mounts at right angle and tightens via set screw.

Measure relative humidity from 0 to 100% and temperature from -40°C to +85°C.

Read and write to RFID tags up to 6cm away. Supports EM4100 series, ISO11785 FDX-B and our own PhidgetTag protocols.

This board has 2 SPDT mechanical relays rated at 210W for DC or 1750VA for AC.

Switch the power of up to four circuits at 210W of DC power or 1750 VA of AC power with this mechanical relay module.

Features of the weather-resistant MB7584, SCXL-MaxSonar-WRST, include the reduced impact of condensation and frost when ran continuously in closed ...

Control up to 8 RC servo motors or actuators with this controller board. Connects to your computer via USB.