Cataloghi

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based ...

The SparkFun 5V/1A LiPo Charger/Booster is a no-nonsense circuit for generating one amp from a Lithium Polymer battery at 5V. This LiPo charger is ...

Sometimes referred to as \"spade connectors,\" these quick disconnects are really useful as power connectors in prototyping or in projects that are...

The SparkFun Adjustable LiPo Charger is a single-cell lithium polymer (LiPo) and lithium ion battery charger. Because it’s adjustable, this charger...

This isn\'t your ordinary power supply. The Global Power Supply is a 15V, 4.34A power device specifically designed to work with the [JustBoom Amp H...

The Mountable MI:pro is a simple and compact protective case for the micro:bit. These cases feature a three-layer construction style with ability t...

This is a mountable SPDT slide switch --- great for use as a general control switch. The pins are spaced by 3.7mm (0.14\"), making breadboard use n...

This Digital LED Voltmeter measures the voltage at a particular point of the system it has been hooked up to and then provides a readout on its thr...

These headers are made to work with the SparkFun ESP32 Thing to connect to ESP32 Shield boards. Each set of headers makes your ESP32 Thing easily s...

These are 101mm long 26AWG jumpers with male connectors on both ends. Use these to jumper from any female header on any board to any other female h...

The Raspberry Pi Zero Case has been designed to fit both the Pi Zero and the Pi Zero W. These official cases consist of several parts and protect t...

The Raspberry Pi Zero and Zero W are both equipped with a smaller CSI (Camera Serial Interface) port than on a full-sized Raspberry Pi board --- lu...

This 2xAAA battery holder puts a nice finishing touch on your battery-powered project. This holder features a sliding, removable cover as well as a...

This 2x20 \"tall\" header has the same number and spacing of pins as a Raspberry Pi and provides your board with the ability to extend the heights ...

This is a small, adjustable part box for components, breakouts and development boards. Made from a clear polypropylene with reliable locking tabs, ...

These are very slim, extremely light weight batteries based on Lithium Ion chemistry. Each cell outputs a nominal 3.7V at 2000mAh! Comes terminated...

These are very slim, extremely light weight batteries based on Lithium Ion chemistry. Each cell outputs a nominal 3.7V at 850mAh! Comes terminated ...

This is a very small, extremely light weight battery based on Lithium Ion chemistry. This is the highest energy density currently in production. Ea...

This is an extremely tiny and light weight battery based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in ...

These are our small, beefy aluminum enclosures, which have been built tough enough to withstand a truck. This 2mm-thick, die-cast enclosure is rate...

These are our large, beefy aluminum enclosures, which have been built tough enough to withstand a truck. This 2mm-thick, die-cast enclosure is rate...

Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making...

This Thermocouple Connector is perfect for bridging the gap between Type-K thermocouples with standard connectors with a PCB. This little connector...

Sometimes it\'s nice to have a protoboard that\'s super long and skinny, super small, or just a bunch of holes. The SparkFun Snappable Protoboard i...