Cataloghi

This is a very common signal diode - 1N4148. Use this for signals up to 200mA of current. **Documents:** * [Datasheet](https://www.diodes.com/ass...

BlinkM is a “Smart LED”, a networkable and programmable full-color RGB LED for hobbyists, industrial designers, prototypers, and experimenters. It ...

This is a very common 22pF capacitor. Used with crystals for loading purposes. 0.1\" spaced leads make this a perfect candidate for breadboarding a...

Your basic 7-segment LED. Common anode. Two decimal points, but only the one on the right is wired. Digit height is 0.6\". Overall height is 1\" *...

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in breadboards and perf boards, these 330Ohm resistors make excellent LED current limiter...

This is a very common 0.1uF capacitor. Used on all sorts of applications to decouple ICs from power supplies. 0.1\" spaced leads make this a perfec...

1/6th Watt, +/- 5% tolerance PTH resistors. Commonly used in PCBs and perf boards, these 10K resistors make excellent pull-ups, pull-downs, and cur...

This is a handy little device that can save your system from smoking. A resettable fuse (also known as a [PTC](http://en.wikipedia.org/wiki/Positiv...

This is a small ambient light sensor that acts as an NPN transistor. The more the sensor is exposed to light, the stronger the base bias. Simple to...

These are *very* bright LEDs. The LEDs are so bright that it hurts to look directly at them. Please take a look at the pictures to get an idea of t...

Surface mount 3-way switch. These switches are commonly found on handheld devices like MP3 players. This switch allows the user to navigate using u...

DIP switch with 8 individual switch positions. The pins have .1\" spacing - fits great into a breadboard! Works great as general control switches. ...

This a simple breakout PCB for our [4x4 silicone button pads](https://www.sparkfun.com/products/7835). Each LED and button can brought out to the s...

This is the very popular RGB combo but in SMD form. These units have four pads with a common anode configuration. Use this one LED for three status...

This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at [monome.org](http://monome.org). Each button ha...

Yes you read that correctly - 10Farad capacitor. This small cap can be charged up and then slowly dissipated running an entire system for hours. Co...

Nordic Semiconductor nRF24L01+. Transceiver chip operating in the 2.4GHz band. Take all the coolness of the nRF2401A and add some extra pipelines, ...

The ever-popular FTDI USB to UART IC now comes with built-in EEPROM and built-in oscillator! This IC comes in a 28-pin SSOP package and can be sold...

Surface mount DPDT switch for those tight portable designs. Capable of switching up to 1.2VA (360mA at 3.3V and 240mA at 5V). **Documents:** * [ ...

This is a 1A Adjustable SOT-223 voltage regulator capable of outputting 1.2V to 18V. The LM1117 uses the same pin-out and setup as the popular LM31...

The \'must have\' IC for 3V projects. This is the RS232 converter IC that is capable of running at 3V and communicating with 3V logic. Comes in an ...

Standard \'Watch\' or Real-Time-Clock crystal. 32.768kHz means it is precisely half of a 16-bit counter. Start counting at 0x8000 (or 32768). When ...

Standard frequency crystals - use these crystals to provide a clock input to your microprocessor. Rated at 20pF capacitance and +/- 50ppm stability...

LEDs - those blinky things. A must have for power indication, pin status, opto-electronic sensors, and fun blinky displays. This is a very standa...