Devantech

The WIFI008 provides 8 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which c...

If you have more than 32 devices on your DMX cable, you need to provide a Splitter/Buffer to maintain the DMX signal quality. This 4 Way Optically ...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC o...

The iceFUN module is powered from USB or an external 5v supply. There are on-board 3.3v and 1.2v regulators. All PIC and FPGA I/O pins are 3.3v...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR20 is a WIFI connected relay module using the popular ESP32. It prov...

Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of ASCII, Binary or Modbus...

Powered and Controlled from the USB bus.Relays - 4 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

The USB-ISS module is an enhanced version of our low cost USB-I2C module, offering additional functionality at the same low price. Communication to...

dS378 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS378 mo...

iceWerx iCE40-HX8K FPGA 4 10-bit Analogue input channels via onboard PIC.63 FPGA I/O pins available (3.3 volt). iCE40 HX FPGA:7680 Logic cells128k ...

dS2832 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS2832 ...

The MIDI-RLY8 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays. ...

Controlled over Ethernet using simple TCP/IP commands.Relays - 20Analogue Inputs (0-5v) - 16Power - 12V DC adaptor, supplied separately.Configurat...

Controlled over Ethernet using simple TCP/IP commands.Relays - 10Analogue/digital Inputs - 16 inputs at 5v 10 analogue conversion or will report i...

Expansion board for the dScript modules providing low voltage DC inputs (analogue or digital) and two extra relays, powered and controlled through ...

Developed in collaboration with Manu Systems, the WOR-R1 is a solid research base carrying the RD02 robot drive. There are slot cutouts in the base...

Controlled over Ethernet using simple TCP/IP commands or MQTT. Built with Inductive load switching in mind.Ideal for solenoids, relays, valves and ...

The BT004BLE provides four volt free contact relay outputs with a current rating of up to 16Amp each controlled over a HM10 Bluetooth serial port. ...