DFRobot

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Smal...

This OLED display module uses the SSD1306 drive chip, has 128x32 self-illuminating white pixels, and adopts the back chip-mounting pad design. Smal...

What is a buck converter? A buck converter is a DC-to-DC converter that steps down the input voltage and steps up the output current. It does not w...

Single color dot matrix LED displays are common in the market while small RGB displays are in short supply. This Gravity: I2C 8x16 RGB LED Matrix P...

Gravity: UART & I2C NFC Module adopts NXP PN532, a highly integrated NFC communication controller, which supports various types of NFC smart ca...

If sensors are used in your equipment or control systems, having these signal converter modules like this NPN to PNP converter readily available co...

Note: The wire color is random. This is a DC sucker-type electromagnet with 25kg holding force and 2.5W power. It should be operated at 5V. The mag...

Note: The wire color is random. This is a DC sucker type electromagnet with 20kg holding force and 1.5W power. It should be operated at 5V. The mag...

This Power Module is a small size 5A 350KHz 25V Buck DC to DC Converter. It can convert any DC voltage between 3.6V-25V to a selectable voltage fro...

In many applications, we will use lithium batteries as our power solutions. In this kind of application, the most two important things are the powe...

Note: The wire color is random. This is a DC sucker type electromagnet with 8kg holding force and 1.5W power. It should be operated at 5V. The magn...

Still using a big, bulky, traditional power adapter to charge your lithium battery? DFRobot provides you with a compact and efficient 7.4V lithium ...

This is a small DC - DC boost module that converts a 0.9 ~ 5v power source to standard 5V, making it capable of supplying power to an Arduino micro...

Note: The wire color is random. This is a DC sucker type electromagnet with 35kg holding force and 3W power. It should be operated at 5V. The magn...

Note: The wire color is random. This is a DC sucker type electromagnet with 30Kg holding force and 3W power. It should be operated at 5V. The magne...

This is a waterproof DC-DC converter. With 12V/24V (11-35V) DC input, it converts to 7.5V@5A which is an ideal supply for robots.

This small 12~24V to 5V 3A dual USB power step-down converter supports all 5V main controllers. Its two USB ports can output 5V/3A at the same time...

This fast-charging module comes with both USB and Type-C ports, supporting 10.5-32V voltage input and 5V/3A output, and multiple charging protocol...

Small and exquisite, this 0.96” TFT screen employs an edge-to-edge design and offers glorious 160×80HD 16-bit color display, which can be suitable ...

Note: The wire color is random. This is a DC sucker type electromagnet with 15kg holding force and 2W power. It should be operated at 5V. The magne...

This wireless charging module, composed of transmitting and receiving ends, can transfer energy through medias such as air, paper, or plastic. Base...

This USB(input) to DC(output) boost converter can step up 5V to 9V/12V, with a switch for selecting voltage and a digital LED display for showing o...

On the same I2C port, DFRobot Gravity: I2C Multiplexer solves the address conflict and enables the normal communication with multiple same-address ...

Are you still distressed that industrial sensors can't be used on the Arduino? You may need to get a converter just like this! This 12V to 5V leve...