DFRobot

Are you still distressed that industrial sensors can't be used on the Arduino? You may need to get a converter just like this! This 12V to 3.3V le...

Note: The wire color is random. This is a DC sucker type electromagnet with 3kg holding force and 1W power. It should be operated at 5V. The magnet...

Note: 18650 battery is not included. You already have all kinds of power supply equipment such as dry battery, lithium battery and power adapter, ...

This is a 20W DC-DC buck converter power module with 7~24V input and 5V/4A output(Max). The high conversion efficiency and on-board 6 output ports ...

This DC-DC boost power supply module steps up any input voltage from 2.5V~VOUT to the output voltage of 5V/8V/9V/12V(default to 12V) at a conversio...

This industrial-grade 50W high-power step-down module offers a voltage input range of 9-18V and a maximum output of 5V/10A. It has the characterist...

Note: The wire color is random. This is a DC sucker type electromagnet with 15kg holding force and 2W power. It should be operated at 5V. The magne...

This IV-18 VFD tubes Clock (Energy Pillar) is a fully assembled and calibrated IV-18 VFD clock. It displays hour, minute, second. Eight digits IV...

After purchasing an open-source product that is not electrical level compatible, you may find that your sensor cannot work normally or even is easy...

If you have tried our 64×64 or 64×32 RGB LED Matrix Panel, but you had to give up some of your original ideas and designs out of the limitation of ...

This is a miniature servo that can be connected in series, which can be controlled individually or in a unified manner through TTL serial communica...

After purchasing an open-source product that is not electrical level compatible, you may find that your sensor cannot work normally or even is easy...

Use this 12V solenoid valve to control the flow of liquid! This is an automated and manual solenoid valve that comes with three colors control wire...

Use this 12V solenoid valve to control the flow of liquid! This is an automated and manual solenoid valve that comes with three colors control wire...

This is a dual channel DC motor driver with an extremely small size of of 1.97”×1.97”×0.49”. The module comes with two motor channels that can driv...

This is a waterproof DC-DC converter. With 8-40V DC input, it converts to 24V@6A which is an ideal supply for mobile robots, and motors.

This 40W high power DC-DC Buck converter offers a 6~14V input voltage range and up to 5V/8A output. Featuring a small body, high conversion ratio,...