Salta il contenuto

Lingua

SKU DFR0654-F/B

FireBeetle 2 ESP32-E IoT Microcontroller with Header (Supports Wi-Fi & Bluetooth)

Prezzo originale €14,49 - Prezzo originale €14,49
Prezzo originale
€14,49
€14,49 - €14,49
Prezzo attuale €14,49

Tutti i prezzi sono IVA inclusa

Disponibilità:
in magazzino
Disponibilità:
Esaurito
Disponibilità:
Da Ordinare
Spedizione : 4-6 Giorni
Richiesta Sconto per Quantita' e Informazioni

FireBeetle 2 ESP32-E, specially designed for IoT, is an ESP-WROOM-32E-based main controller board with dual-core chips.

DFR0654-F supports WiFi and Bluetooth dual-mode communication and features a small size, ultra-low power consumption, onboard charging circuit, and easy-to-use interface, which can be conveniently used for smart home IoT, industrial IoT applications, wearable devices, and so on. You can easily create your own IoT smart home system when connecting it with an IoT platform like IFTTT.

FireBeetle 2 ESP32-E supports Arduino programming and will support Scratch graphical programming and MicroPython programming very soon. We provide you with detailed online tutorials and application cases, and there are thousands of sensors with welding-free Gravity interfaces and actuators to help you get started easily. Besides, the stamp hole design makes it able to be easily embedded in your PCB, greatly saving your costs and time to build and test a prototype.

We sell two versions of Firebeetle 2 ESP32-E, unsoldered version and with header version. If you want to plug the Firebeetle shield into your Firebeetle mainboard, the Firebeetle 2 Board ESP32-E(Pre-soldered) is better for you.

Note: FireBeetle 2 and FireBeetle pins and sizes are not compatible, and neither are the expansion boards.

FireBeetle 2 ESP32-E IoT Microcontroller with header (Supports Wi-Fi & Bluetooth)

Figure 1. Board Overview

FireBeetle 2 ESP32-E IoT Microcontroller with header (Supports Wi-Fi & Bluetooth)

Figure 2.Pinout


What's the difference between FireBeetle ESP32 and FireBeetle 2 ESP32-E

FireBeetle ESP32-E IoT Microcontroller (Supports Wi-Fi & Bluetooth)

Name

ESP32 IoT Microcontroller

ESP32-E IoT Microcontroller

SKU

DFR0478

DFR0654

Microcontroller

ECO

ECO V3

Power supply interface

Micro USB

USB-C

USB to UART

CH340C

CH340K

Operating Voltage (V)

3.3V

3.3V

Flash(KB)

16MB

4MB

SRAM(KB)

520k

520k

Analog pins

5

5

Digital pins

10

10

UART

1

1

I2C

1

1

SPI

1

1

side key

×

RGB_LED

×

DisplayPortGDI

×

stamp holes

×

fool-proof

×

Silkscreen

underside

two-sided

Mount Hole Sizemm

3.5

2

Dimension(mm)

29*58

25.4 × 60

Weight (g)

24 g

23g

Espressif has recently released one wafer-level change on ESP32 Series of products (ECO V3). Below are the main design changes in ECO V3 Series of chips:

1. PSRAM Cache Bug Fix: Fixed “When the CPU accesses the external SRAM in a certain sequence, read & write errors can occur”.

2. Fixed “When each CPU reads certain different address spaces simultaneously, a read error can occur.”

3. Optimized 32.768 KHz crystal oscillator stability, the issue was reported by the client that there is a low probability that under ECO V1 hardware, the 32.768 KHz crystal oscillator couldn’t start properly.

4. Fixed Fault injection issues regarding secure boot and flash encryption are fixed.

5. Improvement: Changed the minimum baud rate supported by the CAN module from 25 kHz to 12.5 kHz.