DFRobot

Note: micro:Maqueen Lite, micro:bit board and battery are not included, you can buy them separately. Maqueen Loader includes a set of mechanical p...

Note: micro:Maqueen Lite, micro:bit board and battery are not included, you can buy them separately. Use this kit to change your Maqueen Lite and ...

Torque limiter is a protective device that limits the torque transmitted in a drive system by slipping when the torque demand exceeds a preset valu...

qualMeter miniLoad is specially designed for extending the qualMeter Basic's charger output testing range. When plugging miniLoad into qualMeter Ba...

These are 8mm (0.31") copper sleeves that will slide perfectly onto 8mm (0.31") rods. Perfect for your 3D printer prototyping needs!

This is a “5-track, 4-wave line” digital storage oscilloscope for general-purpose electronic engineering tasks and it is based on the ARM Cortex M3...

Time to upgrade! This is a upper deck PCB for the 2WD MiniQ Robot Chassis. It is compatible with 9g micro servo and URM ultrasonic mounting bracket...

A prototyping board is one of the main steps in hardware development, also called a perf board. Breadboard, wiring and punching in chips, resistors...

Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping. The Screw terminal ca...

This is a SOP8 to DIP8 Adapter Board. You can change the SOP8 to DIP8 packaging.So that You needn't to buy the DIP chips for prototyping special...

This is a SOP8/SOP16/SOP28 to DIP16/DIP28 Adapter Board.You can change the SOP8/SOP16/SOP28 to DIP16/DIP28 packaging. So that You needn't to buy th...

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Me...

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Me...

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Me...

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield. Strong self-adhesive backing. Me...

This is a very small breadboard with 170 tie points. This bread board is compatible with the Arduino Proto Shield shown below. Strong, self-adhesiv...

This is a very basic double sided prototyping board with standard 0.1" spacing with 4x3mm (0.16x0.12") holes for mounting. The leaf pads makes you...

This is the very first prototyping shield for Arduino in the market since 2010. It comes with prototyping area that you can sold led , switch or o...

These are a longer version of our standard break away headers. They are 10mm long which allows you use them socket to socket. The plastic separa...

This is a design for an open-source prototyping shield for Arduino Mega. It has tons of cool features, to make prototyping on your Arduino easy....

This is a very basic double sided prototyping board with standard 0.1" spacing through holes and four 3mm diameter mounting holes. There are 22...

Micro: breadboard is a micro:bit-based expansion board specially designed for STEM-starter. It comes with a 3.23*2.17” breadboard (independent pack...

The 400 Tie Point Interlocking Solderless Breadboard is a cute half size breadboard, good for small projects. It is 8.2cm x 6.2cm in size with a st...

This is a very simple board that takes a 6-12V input voltage and outputs a selectable 5V or 3.3V regulated voltage. All headers are 0.1" pitch for ...