MAGENTO IMPORT

  Set of 10 jumper cables. Male pins on both end for plugging into breadboards or development boards with female headers. Total length: 24cm. Also ...

  Set of 10 jumper cables. Male pins on both end for plugging into breadboards or development boards with female headers. Total length: 20cm. Also ...

  Set of 10 jumper cables. Male pins on both end for plugging into breadboards or development boards with female headers. Total length: 11cm. Also ...

  Set of 10 jumper cables. Male pins on both end for plugging into breadboards or development boards with female headers. Total length: 14cm. Also ...

  This is rechargable Li-Po high discharge current battery with JST connector ready to plug to OLIMEXINO-328, OLIMEXINO-STM32, PIC32-PINGUINO, PIC3...

A low cost and very compact Li-Po battery charger, based on Microchip MCP73833 with three status LEDs for displaying the battery status, works with...

This is a rechargeable Li-Po high discharge current battery with JST connector ready to plug to: OLIMEXINO-328, OLIMEXINO-STM32, PIC32-PINGUINO, P...

This is a rechargeable Li-Po high discharge current battery with JST connector ready to plug to: OLIMEXINO-328, OLIMEXINO-STM32, PIC32-PINGUINO, PI...

ATMEGA32U4 microcontroller, all in one USB communication no need for external FTDI chip. Input power supply 7-12VDC ULTRA LOW POWER voltage regu...

Thermocouple connector Uses MAX6675ISA UEXT connector FR-4, 1.5 mm, soldermask, component print Dimensions: 22x18mm (0.9 x 0.7") HARDWARE MOD...

  FEATURES: USB to serial cable three wires for Breadboard connection SERIAL output 3.3V voltage levels GND=BLUE, RX(INPUT)=GREEN, TX(OUTPUT)=RED ...

MOD-WIFI-ESP8266-DEV is the ultimate development board for ESP8266 with all GPIOs and resources exposed, can be soldered to PCB or used with breadb...

ALUMINIUM-HEATSINK-20x20x6MM is a small (20x20x6)mm aluminium heatsink radiator specially made for A10/A20 BGA chips. During heavy computations lik...

    FEATURES: USB plug in module, works with every USB host which supports HID Keyboard and CDC Read RFID125 kHz tags from up to 5-15 cm dis...

THERMOCOUPLE K-TYPE SENSOR -50+700C

The GP2Y0A21 Sharp distance sensor is a great way to add obstacle avoidance or motion sensing to your robot or any other project. The detection r...

   ARDUINO like board with ATMEGA328. FEATURES: ATMEGA328 microcontroller can work at different frequencies with easily exchange of the qu...

ESP8266 is very highly integrated SOC which includes Xtensa LX106 core processor, RAM, RF front end and allow WIFI TCP-IP stack to be implemented o...

40-PIN RIBBON CABLE SUITABLE FOR A13-OLINUXINO

Allow BLE devices as iPhone, Samsung Galaxy etc to connect to Arduino boards. MOD-nRF8001 have demo examples for Arduino (AVR), Pinguino (PIC32) an...

BB-VNH3SP30 is full bridge driver with up to 30A and 36V working voltage. It is good to drive Gear Robot motors with reversal function. STATUS LEDs...

FEATURES PIC32MX440F256H 80 Mhz microcontroller 256KB Flash 32KB RAM microSD card for data logging UEXT connector which allow many existing mod...

MPU6050 is MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capab...

A10-OLinuXino-LIME is a very compact (84x60)mm Linux Open-source Hardware computer FEATURES A10 Cortex-A8 CPU 1GHz and Mali 400 GPU 512MB DDR3 R...