MAGENTO IMPORT

FEATURES: USB plug in module, works with every USB host which supports HID Keyboard and CDC Read RFID125 kHz tags from up to 5-15 cm distanc...

With this module you can easily interface our development boards with UEXT to industrial networks with RS485 interface, metering instruments etc MO...

BMP085 is barometric pressure digital sensor which measures pressure in range 300..1100hPa (+9000m .. -500m above sea level) BMP085 is with I2C int...

SD card with the Linux image for iMX233-OLinuXino-SD

This a basic plastic enclosure for the A20-OLINUXINO-MICRO and A20-OLINUXINO-MICRO-4GB boards. It consist of two plexyglass plates, eigth M3 screws...

OPEN SOURCE HARDWARE EMBEDDED ARM LINUX SINGLE BOARD COMPUTER WITH ALLWINNER A10 CORTEX-A8A10-OLinuXino-LIME-4GB is a very compact (84x60)mm Linu...

The product consists of two cables - a SATA cable and a power cable. The SATA cable is suitable for connecting 2.5″ SATA drives to A20-OLinuXino. T...

Typically this splitter board comes in handy when you have to connect more than one I2C module to an Olimex board. It can also help to connect thre...

A13-OLinuXino is a low-cost single-board Linux computer in a very compact nano-ITX form. It uses the very first Cortex A8 processor available in eL...

   FEATURES: MCU: PIC18F14K50 20-Pin USB Flash Microcontrollers with nanoWatt XLP Technology. mini USB connector status led male U...

AVR-ISP500-TINY is fast and reliable USB AVR programmer. It have two modes of work: STK500 compatible USB programmer and USB Mass storage. In ...

MOD-OLED-128x64 is low cost, low power, high contrast LCD display with UEXT connector. You can control it via I2C. The power supply required is onl...

The perfect platform for your next battle bot. Metal plate with provisions to mount Arduino and sensors. FEATURES Chassis size: 100 x 85 mm Two 6...

Input voltage range: (9-36)VDC Fixed output voltage: 5V or 12V selectable Screw terminal and power jack for input Screw terminal, USB-A connecto...

FEATURES Allwinner A20 dual core Cortex-A7 processor, each core typically running at 1GHz and dual-core Mali 400 GPU 1GB DDR3 RAM memory 4GB NAND...

MOD-RGB is a completely open-source module suitable for controlling LED strips. The LED strips might be of the same color or different colors. The ...

MOD-TC-MK2-31855 is an upgrade over MOD-TC in a lot of ways. It comes with firmware allowing easier I2C interfacing to host boards via simple UEXT ...

iMX233-OLinuXino-Micro is a single-board Linux computer in a very compact form. FEATURES iMX233 ARM926J processor at 454Mhz 64 MB RAM SD-card con...

HMC5883L is 3-Axis Digital Compass with 12-bit ADC that enables 1° to 2° compass heading accuracy. HMC5883L usses I2C communication interface and c...

BOOTABLE MICRO SD CARD WITH DEBIAN IMAGE Please note: this SD card is suitable only for A10-OLinuXino-LIME

Implements CH340 Fully open hardware design USB mini connector - USB 2.0 Full Speed compatible Serial interface with variable baud rate - 50 bps ...

Pins with springs for testers, ICSP connectors etc

ARDUINO Leonardo like board with ATMEGA32U4. Features: ATMEGA32U4 microcontroller, all in one USB communication no need for external FTDI chip...

This is the ultimate IoT board with wired 100Mb Ethernet Interface, Bluetooth LE, WiFi, Remote control IR, and CAN connectivity. The board can oper...