MAGENTO IMPORT

These are 6" long jumper wires with female connectors on both ends. Use these to jumper from any male header on any board, to any other male header...

Side-looking Infrared Emitters and IR Detectors. These simple devices operate at 940nm and work well for generic IR systems including remote contro...

  Standard 22 AWG stranded black wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wire is recommended f...

  Standard 22 AWG stranded red wire. Use this for soldering wire or any project in which you need flexible wire. Stranded wire is recommended for...

This is a joystick very similar to the 'analog' joysticks on PS2 (PlayStation 2) controllers. Directional movements are simply two potentiometers...

  Standard 22 AWG solid white hook up wire. Use this with your bread board or any project in which you need sturdy wire. Comes in small spools of ...

These are 150mm long jumpers. Multiple jumpers can be installed next to one another on a 0.1" header. Comes as 1 package of one hundred jumpers (co...

This little round on/off rocker switch is rated up to 10A at 125VAC and can be panel mounted in a 20mm diameter hole. It'll also look pretty slick ...

This is a simple 3 wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, bare...

It's blue! It's thin (0.8mm)! It's the Arduino Pro Mini! SparkFun's minimal design approach to Arduino. This is a 3.3V Arduino running the 8MHz boo...

Screw Terminals with 3.5mm pitch pins. Comes in 2 or 3 positions and have the really cool feature of slide-locking together to form any size you ...

Check out these big 10mm through-hole LEDs! The opaque epoxy package causes these LEDs to have a soft, diffuse glow. Features: Forward Voltage...

This is a simple 4 wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bare c...

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things l...

If you want to get some sound out of your project but have a tight space budget, this is a good way to do it. This 0.25W, 8Ohm speaker is only 40mm...

Description: This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle (degree...

  These are nice, solid curved tweezers. They have a very fine tip which allows you to pick up very small parts with precision. This is a great too...

  Potentiometers are incredibly useful, whether you're controlling the volume on your stereo or the 'mood lighting' in your room. The problem with ...

If you've ever tried to connect a 3.3V device to a 5V system, you know what a challenge it can be. The SparkFun bi-directional logic level converte...

This 9V battery holder allows your battery to snap in tight and holds it in place, which is great in situations where you don't want the battery ju...

  These steppers are a great way to get things moving, especially when positioning and repeatability is a concern. Features: Step Angle (degre...

Alligator clips (or Crocodile clips, if you prefer) are likely to be the most useful thing on your workbench besides the workbench itself. Whether ...

Simple SPDT slide switch. Rated at 30V/200mA. The pins have .1" spacing - fits great into a breadboard! Use it as a power switch or general control...