Motori

The ETH0621 offers 6 digital inputs (accepting 10V - 24V), 2 independently switched 24V 5A outputs  and a 24 volt, 5A motor controller that effortl...

This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1″-pitch through holes. It works wi...

This is our new Hobby Motor now with a 6mm, 10 tooth, gear to make your basic projects a little simpler to manage. It works well for basic things l...

The PhidgetAdvancedServo 1-Motor allows you to control the position, velocity, and acceleration of one RC servo motor. The 1066 is powered solely...

This is a DC sucker type electromagnet with 25kg holding force and 1W power. It should be operated at 5V. The magnetic poles of the electromagnet c...

This is a 2 wire (+-) blower fan for all your cooling needs.  SPECIFICATION     Supply voltage: DC 12V Current consumption: 0.3A       SHIPPING L...

The SparkFun Stepoko is an Arduino compatible, 3-axis control solution that runs grbl software and is able to connect to your computer to accept st...

Bracket for RX64 Dynamixel Servos, 4 screw and 4 nuts included.   More informations about the Dynamixel System ->

Includes: - Horn Idle : 1 pc - MF128ZZ Bearing : 1 pc - Cap Bearing : 1 pc - Wrench Bolt (M2.5*4) : 8 pcs - Wrench Bolt (M3*8) : 1 pc ...

For RX64 Dynamixel Servos. Includes: - Thrust Horn : 1 pc - Wrench Bolt (M3*8) : 1 pc - Wrench Bolt (M2.5*4) : 8 pcs - 1024T Bearing : 1 pc ...

For RX28 and RX10 Dynamixel Servos. Includes: - Thrust Horn : 1 pc - Wrench Bolt (M2.5*8) : 1 pc Thrust washer not inclu...

SPECIFICATIONS - This part is assembled on to the final wheel gear and is used to connect with other frames for the RX-10 and RX-28. - The center...

For RX28 and RX10 Dynamixel Servos. Includes: - Thrust Horn : 1 pc - Wrench Bolt (M3*8) : 1 pc - Wrench Bolt (M2.5*4) : 8 pcs - Bearing : 1 p...

Bracket for RX28 and RX10 Dynamixel Servos, 4 screw and 4 nuts included.     More informations about the Dynamixel System ->

RoboSpine does for your robot what your spinal chord does for you. It connects eyes and ears to the brain and the brain to the muscles. RoboSpine c...

These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and ...

  The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driv...

This is the newest version of EasyDriver V4, and it provides much more flexibility and control over your stepper motor, when compared to the olde...

This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 297.92:1 metal gearbox. It has a cross section of 10 ...

This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 150.58:1 metal gearbox. It has a cross section of 10 ...

This gearmotor is a miniature high-power brushed DC motor with long-life carbon brushes and a 29.86:1 metal gearbox. It has a cross section of 10 ×...

This breakout board makes it easy to use Toshiba’s TB67S279FTG microstepping bipolar stepper motor driver, which features adjustable current limiti...

This gearmotor is a powerful 12V brushed DC motor with a 131.25:1 metal gearbox and an integrated quadrature encoder that provides a resolution of ...

This compact expansion board plugs directly into the GPIO header on a Raspberry Pi B+ and provides an easy and low-cost solution for driving a pair...