Phidgets

This optical rotary encoder connects directly to a Phidgets Encoder Interface.

This DC actuator has a stroke length of 100mm with a peak force of 60N and a peak speed of 15 mm/s.

This K-Type thermocouple measures temperatures from -40°C to 400°C and connects to a Phidgets thermocouple board.

This powerful bipolar stepper with a rear shaft and a gearbox has a 0.023° step angle and 240 kg·cm of torque at low speeds.

This 2kg load cell measures tensile forces (e.g. hanging loads).

This 55mm load cell is ideal for small weighing scales.

This DC actuator has a stroke length of 50mm with a peak force of 50N and a peak speed of 32 mm/s.

Write text and draw pictures to this 128x64px graphic LCD display that connects to a VINT port.

Sensing changes in IR light, this sensor detects movement in a small room or hallway and connects to an analog input.

This spatial board has a 3-axis accelerometer, gyroscope and compass with high resolution readings at low magnitudes.

This encoder can measure rotation at speeds of up to 3000 RPM and plugs into a Phidgets Encoder Interface.

This encoder interface can measure 500,000 quadrature cycles per second at 125 Hz.

Detect several solid objects up to 10m away in a wide sensing range, or use this Phidget as an ultrasonic range finder.

Reads one 4-20mA, frequency output, PNP/NPN or 5V sensor, and provides 12 or 24V without an external supply.

Add 4 isolated active-high digital inputs to your hub at the cost of only one VINT port.

This DC motor has a 4.25:1 gearbox, a rated speed of 588 RPM and rated torque of 5.1 Kg·cm.

These waterproof connectors allow you to attach 2 cables together while protecting the connection from the elements.

Add four 5V PWM-enabled digital outputs to your hub with this simple and affordable module.

This VINT Hub has six high-speed VINT ports and is ideal for new Phidget systems.

This VINT Hub has six VINT ports.

Stationary support for linear shaft. Mounts at parallel to shaft and tightens via bolt.