Phidgets

        With its paper-thin construction, flexibility and force measurement ability, the Thin Force sensor can measure force between almost any tw...

This 150cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hub port...

Note: The 1041_0B is identical to the 1041_0, except that it comes pre-assembled in a plastic shell enclosure and you have the option of which leng...

Bridge-based sensors are are a common type of resistive sensor that produce a very small voltage drop. Load cells, strain gauges, pressure sensors,...

Most of the sensors sold at Phidgets are simple 0-5V devices that can be read directly from a VINT port. But sometimes, you need a special sensor, ...

Flanged bearings allow you to mount an object perpendicularly to the axis of travel. This is useful for elevator type applications where you want t...

The PhidgetEncoder HighSpeed connects to any typical two-bit optical encoder and can return up to 500,000 counts per second. Specifically it reads...

 Thermocouples are widely used to measure extreme temperatures impossible to measure with other types of sensors. J, K, E and T thermocouples are d...

For applications that require a ton of outputs, this module is the one you're looking for. With sixteen PWM-enabled relay outputs, it can be used t...

The PhidgetInterfaceKit 0/16/16 provides:   16 Digital Inputs - with hardware noise filtering - sensing up to 30VDC 16 Digital Outputs co...

  Product Features For OEMs and Systems Integrators Small: DIP-36 package Includes a mini-USB connector Product Description   Pr...

Controlling the power circuits of as many as four separate devices is a snap with this relay module. Each mechanical relay can control a seperate c...

The 1067 – PhidgetStepper Bipolar HC allows you to control the position, velocity, and acceleration of one bipolar stepper motor. This is the produ...

If you need to read a whole bunch of logic-level signals, this input module adds sixteen active-high digital inputs using just one port on your VIN...

This NEMA-23 motor has an integrated Planetary gearbox with a 41/4:1 ratio. It comes with the rear shaft exposed, so you can mount anencoder or sha...

The PhidgetLED 64 allows you to independently control 64 Light Emitting Diodes. Each LED can have the current limit set individually, and the brigh...

The HUB0001 is a drop-in replacement for the HUB0000, supported by Phidget22 version 1.8 or newer. HUB0001 will enable data rate increases...

Measure relative humidity from 0 to 100% and temperature from -40°C to +85°C. Measure relative humidity and air temperature, in non-condensing envi...

The PhidgetSpatial Precision 3/3/3 combines the functionality of a 3-axis compass, a 3-axis gyroscope, and a 3-axis accelerometer all in one conven...

This NEMA-34 motor generates 34 kg-cm of holding torque at 2.8 Amps. It comes with the rear shaft exposed, so you can mount anencoder or shaft coup...

  The 1134 - Switchable Voltage Divider is a voltage divider with switches. The switches can be used to control which resistors are used in the vol...

This optical rotary encoder connects directly to a Phidgets Encoder Interface.

This DC actuator has a stroke length of 100mm with a peak force of 60N and a peak speed of 15 mm/s.

This K-Type thermocouple measures temperatures from -40°C to 400°C and connects to a Phidgets thermocouple board.