Phidgets

This bearing for an 8mm linear shaft can be press-fit into another part to allow that part to slide along the shaft.

This bearing for a 25mm linear rail provides a sliding mounting point.

This bearing for a 16mm linear rail provides a sliding mounting point.

This bearing for a 12mm linear rail provides a sliding mounting point.

This bearing for a 25mm linear shaft provides a sliding mounting point.

This bearing for a 16mm linear shaft provides a sliding mounting point.

This bearing for a 12mm linear shaft provides a sliding mounting point.

This bearing for an 8mm linear shaft provides a sliding mounting point.

This DC actuator has a stroke length of 140mm with a peak force of 175N and a peak speed of 8 mm/s.

This DC actuator has a stroke length of 100mm with a peak force of 175N and a peak speed of 8 mm/s.

This DC actuator has a stroke length of 50mm with a peak force of 175N and a peak speed of 8 mm/s.

This DC actuator has a stroke length of 140mm with a peak force of 75N and a peak speed of 20 mm/s.

This DC actuator has a stroke length of 100mm with a peak force of 75N and a peak speed of 20 mm/s.

This DC actuator has a stroke length of 50mm with a peak force of 75N and a peak speed of 20 mm/s.

This DC actuator has a stroke length of 140mm with a peak force of 50N and a peak speed of 32 mm/s.

This DC actuator has a stroke length of 100mm with a peak force of 50N and a peak speed of 32 mm/s.

This DC actuator has a stroke length of 50mm with a peak force of 50N and a peak speed of 32 mm/s.

This servo actuator has a stroke length of 50mm with a peak force of 23N and a peak speed of 12 mm/s.

This servo actuator has a stroke length of 100mm with a peak force of 23N and a peak speed of 12 mm/s.

This light sensor measures from 188 μlux to 220 klux and connects to any VINT port.

Measures light intensities of up to 70 kilolux on a logarithmic scale and connects to an Analog Input or VINT Hub port.

Measures light intensities of up to 1000 lux and connects to an Analog Input or VINT Hub port.

This Phidget uses current control to adjust the brightness of up to 64 LEDs.

Control the current, voltage and brightness of 32 LEDs from a VINT port with this externally powered module.