Automazione

Controlled over Ethernet using simple TCP/IP commands or MQTT. Built with Inductive load switching in mind.Ideal for solenoids, relays, valves and ...

Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of ASCII, Binary or Modbus...

Expansion board for the dScript modules providing low voltage DC inputs (analogue or digital) and two extra relays, powered and controlled through ...

Expansion board providing 230VAC opto inputs and two extra relays for the dScript modules, powered and controlled through the dS modules RS485 port...

Expansion K type Thermo-couple board and 2 extra relays for the dScript modules, powered and controlled through the dS modules RS485 port. Hardware...

The MIDI-RLY8 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays. ...

The BT004BLE provides four volt free contact relay outputs with a current rating of up to 16Amp each controlled over a HM10 Bluetooth serial port. ...

Controlled by modbus RTU over RS485, address, baud rate and parity set by dip switch. Relays - 8 VFC with snubbers on N/ODigital opto isolated inpu...

USB-RLY82 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the USB-...

Ruggedised, Industrial, DIN rail mounting control moduleBuilt in snubbers for safe connection to inductive loads.Optically isolated inputs.Mains po...