Automazione

  Product Features Maximum Load Capacity: 5 kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – Phid...

  Product Features Maximum Load Capacity: 50 kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – Phi...

  Product Features Maximum Load Capacity: 20 kg Wheatstone Bridge Sensor Small: 55.25 x 12.7 x 12.7mm Plugs into the 1046 – Phi...

E' disponibile la nuova versione:  ETH008-B - 8 relay outputs at 16A   OverviewThe ETH008 provides eight volt free contact relay outputs with a cu...

PRODOTTO FUORI PRODUZIONE, SOSTITUITO DALLA NUOVA VERSIONE     The USB-RLY02 provides two volt free contact relay outputs with a current rating o...

  Product Features Maximum Weight: 780g Wheatstone Bridge Sensor Small: 45 x 9.3 x 6mm Plugs into the 1046 – PhidgetBridge 4-In...

The ETH002 provides two volt free contact relay outputs with a current rating of up to 16Amp each. The module is powered from a 12vdc supply which ...

Relays - 8 Isolated Inputs - 8Power - Powered from standard USB busControl interface - USB Input Voltage - 4.5v DC to 27v DCRelay current - Up to 1...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

The 1108 is a Hall-effect sensor that provides a voltage output that is proportional to the applied magnetic field. Comes packaged with a 60cm Sens...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

This 60cm Phidget Cable connects: analog sensors to Phidgets with an analog input or VINT Hub port. VINT devices to Phidgets with a VINT Hub port....

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

    Product Features Cable length: 30cm (12”) 24 AWG copper 30cm USB 2.0 Cable. 24 AWG copper Standard Mini-USB type A to USB type B ...

ETH002 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH002 ...

MOD-IO2 is stackable development board which adds RELAYs and GPIOs to any of our development boards with UEXT. If you work with any of our developm...

The USB-RLY82 provides two volt free contact relay outputs with a current rating of up to 1Amp each. It is powered from any standard USB bus and ha...

The USB-RLY16 provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The processor is powered and instructed fr...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

ETH008 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH008 ...

Number of Relay's - 8 Power - 5v @ 100mA max. Control interface - Serial or I2C Re...

The 1143 Light sensor can measure ambient light up to 70 kilolux (roughly equivalent to the brightness of direct sunlight). Each sensor has been in...

  Overview The USB-OPTO-RLY816 provides eight optically isolated inputs and eight volt free contact relay outputs with a current rating of up to 16...

OverviewA low power version of the USB-RLY16 module, the USB-RLY16L is powered solely from the USB bus and provides eight volt free contact relay o...