Automazione

  Product Features Maximum Load Capacity: 200 kg Wheatstone Bridge Sensor Individually calibrated at the factory Plugs into the 1046 – PhidgetB...

  Product Features Maximum Weight: 50 kg Wheatstone Bridge Sensor Individually calibrated at the factory Plugs into the 1046 – PhidgetBridge 4-...

Temperature sensor with a range of -50°C to +150°C with a typical error of ±0.75°C in the 0°C to 100°C range.   Comes packaged with a 60cm Sensor ...

A good looking professional case for the ETH484 module. Includes mounting holes for fixing to a wall or back panel. This precision snap together ca...

Controlled over Ethernet using simple TCP/IP commands.Relays - 4Digital Switching I/O channels - 8Analogue Inputs - 4 x 3.3v 12 bit or 10 bit for b...

The 3561 roll ball switch will turn the digital input "on" when the roll ball is depressed, and will turn "off" when the ball is released. Produc...

This miniature joystick has two axes and a pushbutton. Each axis, up/down and left/right, has a potentiometer with a center value of approximately...

The 1109 can be rotated 300 degrees and outputs a number between 0 and 1000 based on the shaft position. Comes packaged with a 60cm Sensor Cable. ...

The 1146 IR Reflective Sensor uses an infra-red LED and a phototransistor to measure the distance of an object between 1mm and 4mm away. This senso...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR42 is a WIFI connected relay module using the popular ESP32. It prov...

The Dual Relay Board allows digital outputs of the 1018 InterfaceKit 8/8/8, the 1202 Text LCD or the 1203 TextLCD to control larger loads and devi...

The ETH8020-B is a drop in update of the ETH8020 with additional upgrades. The ETH8020 provides 20 volt free contact relay outputs with a current r...

This sensor can detect the presence of a highly reflective object at 10cm. For less reflective objects (like hands) the distance is about 5cm.   C...

The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analogue inputs. The modul...

The 1142 Light sensor can measure ambient light up to 1000 lux (roughly equivalent to the typical lighting in a studio, or the sky on an overcast d...

The MIDI-RLY08 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays....

Controlled over Ethernet using simple TCP/IP commands.Relays - 2Power - 12V DC adaptor, supplied separatelyConfiguration & Test interface - HTT...

The 1122 measures AC current up to 30 Amps and DC Current from -30Amps to +30Amps. Dual outputs allow the user to measure both the AC and DC comp...

The PhidgetSpatial 0/0/3 is a 3-axis accelerometer that can measure up to ±8g of acceleration in each axis. It is an inexpensive alternative to the...

  The 1120 FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your PC. Just use the cable included with the adapter...

  Product Features Cable length: 180cm (72") 24 AWG copper 180cm USB 2.0 Cable. 24 AWG copper Standard Mini-USB type A to USB type B ...

The PhidgetStepper Unipolar allows you to control the position, velocity, and acceleration of up to 4 unipolar stepper motors. The 1062 can be us...

Controlled over Ethernet using simple TCP/IP commands.Relays - 8Power - 12V DC adaptor, supplied separately.Configuration & Test interface - HT...

Powered and Controlled from the USB bus.The relays used on this board are premium ultra low power 50mW coil types, this means the boards current ...