Automazione

Powered and Controlled from the USB bus.Relays - 2 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

      Product Features Measures voltage from -30V to +30V Typical Error: ±0.7% The sensor is Non-Ratiometric.   Product Descriptio...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR88 is a WIFI connected relay module using the popular ESP32. It prov...

ESP8266 is very highly integrated SOC which includes Xtensa LX106 core processor, RAM, RF front end and allow WIFI TCP-IP stack to be implemented o...

  The SCR02 is a sensor controlled relay module capable of autonomous operation. The SRC02 may be connected to most of our ultrasonic rangers or to...

dS3484 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS3484 ...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which c...

  The 1133 measures sound across a very wide range, with a frequency range of 100Hz to 8kHz and pressure level from 50dB to 100dB.   Product Specif...

The Solid State Relay is used to switch up to 2.5 Amps at up to 40 Volts DC, or 28 Volts AC.   The SSR board is controlled by a digital output on ...

The 1106 reads 0 when no force is applied. As force increases on the circular button the value increases towards 1000.   It is intended as a user...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

dS2824 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS2824 ...

The WIFI008 provides 8 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which c...

dS1242 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS1242 ...

There are so many projects that require motor position control that Phidgets decided to make an inexpensive, reliable option. The ENC4109 is exactl...

This stainless steel probe type thermocouple is easy to install and plugs into a Phidgets thermocouple board. Measure -40 to 400°C with this stainl...

  Product Description The 3805 Enclosure is designed to protect the Rev 2 version of the 1023 – PhidgetRFID while giving you access to all terminal...

    Product Features Additional cables for the 1030 – PhidgetLED-64 4-Conductor, with connectors on both ends   Note: Cut the cables in...

The 1111 detects changes in infrared radiation that occur when there is movement by a person (or object), which is different in temperature from t...

Powered and Controlled from the USB bus.Relays - 6 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR20 is a WIFI connected relay module using the popular ESP32. It prov...

dS378 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS378 mo...

The 3108 - K-Type thermocouple can take continuous temperature readings between -50°C to +800°C with a ±0.75°C accuracy. The 3108 can also take ...