Automazione

The IR Distance Adapter is designed to interface the Sharp GP2D12 sensor to the PhidgetInterfaceKit 8/8/8 or the PhidgetTextLCD.   The Sharp GP2D1...

The 3561 roll ball switch will turn the digital input "on" when the roll ball is depressed, and will turn "off" when the ball is released. Produc...

This miniature joystick has two axes and a pushbutton. Each axis, up/down and left/right, has a potentiometer with a center value of approximately...

The 1109 can be rotated 300 degrees and outputs a number between 0 and 1000 based on the shaft position. Comes packaged with a 60cm Sensor Cable. ...

The 1146 IR Reflective Sensor uses an infra-red LED and a phototransistor to measure the distance of an object between 1mm and 4mm away. This senso...

The PhidgetSpatial 3/3/3 combines the functionality of a 3-axis compass, a 3-axis gyroscope, and a 3-axis accelerometer all in one convenient packa...

The ETH8020-B is a drop in update of the ETH8020 with additional upgrades. The ETH8020 provides 20 volt free contact relay outputs with a current r...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR42 is a WIFI connected relay module using the popular ESP32. It prov...

Analog Inputs The analog inputs are used to measure continuous voltage outputs generated by various sensors such as temperature, humidity, position...

The Dual Relay Board allows digital outputs of the 1018 InterfaceKit 8/8/8, the 1202 Text LCD or the 1203 TextLCD to control larger loads and devi...

Controlled over Ethernet using simple TCP/IP commands.Relays - 2Power - 12V DC adaptor, supplied separatelyConfiguration & Test interface - HTT...

This sensor can detect the presence of a highly reflective object at 10cm. For less reflective objects (like hands) the distance is about 5cm.   C...

Digital Inputs   The Digital Inputs are activated by an external voltage source, triggering on a wide voltage range - 4 to 30VDC. They provide buil...

The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analogue inputs. The modul...

The MIDI-RLY08 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays....

The 1142 Light sensor can measure ambient light up to 1000 lux (roughly equivalent to the typical lighting in a studio, or the sky on an overcast d...

Product Features Protects your PC from overvoltage Increases system stability Protects from overvoltages up to 1kV USB speed sele...

    The FlexiForce sensor is an ultra-thin and flexible printed circuit, which can be easily integrated into most applications. With its paper-thin...

  Product Features Cable length: 180cm (72") 24 AWG copper 180cm USB 2.0 Cable. 24 AWG copper Standard Mini-USB type A to USB type B ...

Measures Relative Humidity from 10% to 95% with a typical error of ±2%RH at 55% RH. Measures Ambient Temperature in the range of -40°C to +100°C w...

The 1122 measures AC current up to 30 Amps and DC Current from -30Amps to +30Amps. Dual outputs allow the user to measure both the AC and DC comp...

Controlled over Ethernet using simple TCP/IP commands.Relays - 8Power - 12V DC adaptor, supplied separately.Configuration & Test interface - HT...

Powered and Controlled from the USB bus.The relays used on this board are premium ultra low power 50mW coil types, this means the boards current ...

The PhidgetBridge lets you connect up to 4 un-amplified Wheatstone bridges, such as: Strain gauges Compression load cells Pressure sensors/Baromet...