Pololu

Red shorting block (removable jumper) designed for 0.1" (2.54 mm) male header pins. These shorting blocks make great removable jumpers and fit stan...

Black shorting block (removable jumper) designed for 0.1" (2.54 mm) male header pins. These shorting blocks make great removable jumpers and fit st...

Yellow shorting block (removable jumper) designed for 0.1" (2.54 mm) male header pins. These shorting blocks make great removable jumpers and fit s...

Blue shorting block (removable jumper) designed for 0.1" (2.54 mm) male header pins. These shorting blocks make great removable jumpers and fit sta...

This Micro-USB cable is 6 ft (1.8 m) long and is terminated on one end by a Type-A USB plug and on the other by a Micro-B USB plug. This cable wor...

This Mini-USB cable is five feet long (1.5 m) and has a male Type-A connector on one end and a male Mini-B connector on the other. This cable work...

This Micro-USB cable is extremely thin (2mm diameter), light, and flexible, which makes it easier to use than bulkier cables that tend to take up m...

This Mini-USB cable is extremely thin (2mm diameter), light, and flexible, which makes it easier to use than bulkier cables that tend to take up mo...

This style of high-current connector is commonly used with the 7.2V sub-C battery packs that power many RC cars. The connector is keyed so that po...

This style of high-current connector is commonly used with the 7.2V battery packs that power many RC cars. The connector is keyed so that power ca...

This 12" (30 cm), 6-conductor ribbon cable has a female 2×3 IDC connector on each end that is designed to plug into a 0.100" (2.54 mm) 2×3 shrouded...

This 12-inch (30-cm) cable has 28 AWG wires and a 3-pin female JST ZH-style connector that mates with the 3-pin connector on Sharp GP2Y0A51 analog ...

This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have matin...

This male JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so that ...

This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so tha...

This 6" (15cm) cable has two 26AWG conductors with a 2.5mm-pitch 2-pin female JST XH-style connector. The spacing is very close to 0.1", which mea...

This 5.5" (14cm) cable has two 26AWG conductors with a 2mm-pitch 2-pin female JST PH-style connector. The other ends of the wires are unterminated;...

Enclosed battery holder for six AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. I...

Enclosed battery holder for four AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. ...

Enclosed battery holder for three AA cells. This holder features a lid that slides over the batteries and snaps into place to fully enclose them. ...

Battery holder for six AA batteries. Details for item #1155 6-AA battery holder. Size: 58 × 90 × 16 mm Cells: 6 AA This battery holder ...

Battery holder for eight AA cells arranged as two back-to-back four-cell holders. Details for item #1161 8-AA battery holder, back-to-back. ...

Battery holder for three C cells. Details for item #1158 3-C battery holder. Size: 59 × 82 × 25 mm Cells: 3 C This battery holder featu...

Battery holder for eight AA cells arranged as two back-to-back four-cell holders. Details for item #1772 8-AA battery holder. Size: 106 ×...