schede & micro

E' disponibile la nuova versione:  ETH008-B - 8 relay outputs at 16A   OverviewThe ETH008 provides eight volt free contact relay outputs with a cu...

PRODOTTO FUORI PRODUZIONE, SOSTITUITO DALLA NUOVA VERSIONE     The USB-RLY02 provides two volt free contact relay outputs with a current rating o...

The USB-RS485 module provides an easy to use RS485 interface by means of a Virtual Com Port on the users system. There are no command structures,...

The ETH002 provides two volt free contact relay outputs with a current rating of up to 16Amp each. The module is powered from a 12vdc supply which ...

Relays - 8 Isolated Inputs - 8Power - Powered from standard USB busControl interface - USB Input Voltage - 4.5v DC to 27v DCRelay current - Up to 1...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

The I2C-LVL01 performs bi-directional I2C level conversion between any two levels: 1.65v to 5.5v.  The connection pins are on a standard 0.1" spaci...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

ETH002 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH002 ...

The USB-RLY82 provides two volt free contact relay outputs with a current rating of up to 1Amp each. It is powered from any standard USB bus and ha...

The USB-RLY16 provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The processor is powered and instructed fr...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

ETH008 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the ETH008 ...

Number of Relay's - 8 Power - 5v @ 100mA max. Control interface - Serial or I2C Re...

  Overview The USB-OPTO-RLY816 provides eight optically isolated inputs and eight volt free contact relay outputs with a current rating of up to 16...

OverviewA low power version of the USB-RLY16 module, the USB-RLY16L is powered solely from the USB bus and provides eight volt free contact relay o...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC o...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

A good looking professional case for the ETH484 module. Includes mounting holes for fixing to a wall or back panel. This precision snap together ca...

  The USB-GPIO12 is a general purpose processor module using the PIC18F14K50. This chip has a USB module built in which we have used to implement M...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR42 is a WIFI connected relay module using the popular ESP32. It prov...

The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analogue inputs. The modul...

The DMX-USB-RX-D8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC or ...