schede & micro

The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analogue inputs. The modul...

The DMX-USB-RX-D8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC or ...

The MIDI-RLY08 provides 8 relay outputs that respond to midi note or control change messages, these can be either mechanical or solid state relays....

Controlled over Ethernet using simple TCP/IP commands.Relays - 2Power - 12V DC adaptor, supplied separatelyConfiguration & Test interface - HTT...

Controlled over Ethernet using simple TCP/IP commands.Relays - 8Power - 12V DC adaptor, supplied separately.Configuration & Test interface - HT...

Powered and Controlled from the USB bus.The relays used on this board are premium ultra low power 50mW coil types, this means the boards current ...

Powered and Controlled from the USB bus.Relays - 2 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

The DMX-USB-RX-A8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 18VAC sup...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR88 is a WIFI connected relay module using the popular ESP32. It prov...

  Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8" r...

  The SCR02 is a sensor controlled relay module capable of autonomous operation. The SRC02 may be connected to most of our ultrasonic rangers or to...

dS3484 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS3484 ...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which c...

  The USB-I2C module provides a complete interface between your PC and the I2C bus. The module is self powered from the USB cable and can supply ...

Right out of the box -Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of A...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC o...

dS2824 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS2824 ...

  Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8" r...

  Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8" r...

The WIFI008 provides 8 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which c...

dS1242 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS1242 ...

If you have more than 32 devices on your DMX cable, you need to provide a Splitter/Buffer to maintain the DMX signal quality. This 4 Way Optically ...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC o...