schede & micro

  FEATURES: USB to serial cable three wires for Breadboard connection SERIAL output 3.3V voltage levels GND=BLUE, RX(INPUT)=GREEN, TX(OUTPUT)=RED ...

ALUMINIUM-HEATSINK-20x20x6MM is a small (20x20x6)mm aluminium heatsink radiator specially made for A10/A20 BGA chips. During heavy computations lik...

FEATURES PIC32MX440F256H 80 Mhz microcontroller 256KB Flash 32KB RAM microSD card for data logging UEXT connector which allow many existing mod...

A10-OLinuXino-LIME is a very compact (84x60)mm Linux Open-source Hardware computer FEATURES A10 Cortex-A8 CPU 1GHz and Mali 400 GPU 512MB DDR3 R...

  With this module you can easily interface our development boards with UEXT to industrial networks with RS485 interface, metering instruments etc....

Suitable for A10-OLinuXino-LIME GPIO connectors.

The adapter is supported in Linux distributions for OLinuXino boards.

  USB-ISO is USB Full speed USB 2.0 compliant port isolator with 1000V isolation voltage. This device is very useful as protects your PC compute...

A13-OLinuXino is a low-cost single-board Linux computer in a very compact nano-ITX form. It uses the very first Cortex A8 processor available in eL...

MOD-RTC add real time clock feature to boards with UEXT connector . The time keeping accuracy is tuned to 2 seconds per day, more accurate tuning i...

ESP8266 is very highly integrated SOC which includes Xtensa LX106 core processor, RAM, RF front end and allow WIFI TCP-IP stack to be implemented o...

MOD-IO2 is stackable development board which adds RELAYs and GPIOs to any of our development boards with UEXT. If you work with any of our developm...

Allows easier interfacing of the A20 board by displays with VGA port connector (very useful if you lack HDMI screen). The signals from the small on...

Allow your Raspberry Pi, A13-OLinuXino-MICRO, BeagleBone etc boards which require 5V input power supply to be powered with any adapter from 6 to 16...

With this module you can easily interface our development boards with UEXT to industrial networks with RS485 interface, metering instruments etc MO...

SD card with the Linux image for iMX233-OLinuXino-SD

This a basic plastic enclosure for the A20-OLINUXINO-MICRO and A20-OLINUXINO-MICRO-4GB boards. It consist of two plexyglass plates, eigth M3 screws...

OPEN SOURCE HARDWARE EMBEDDED ARM LINUX SINGLE BOARD COMPUTER WITH ALLWINNER A10 CORTEX-A8A10-OLinuXino-LIME-4GB is a very compact (84x60)mm Linu...

The product consists of two cables - a SATA cable and a power cable. The SATA cable is suitable for connecting 2.5″ SATA drives to A20-OLinuXino. T...

Typically this splitter board comes in handy when you have to connect more than one I2C module to an Olimex board. It can also help to connect thre...

A13-OLinuXino is a low-cost single-board Linux computer in a very compact nano-ITX form. It uses the very first Cortex A8 processor available in eL...

   FEATURES: MCU: PIC18F14K50 20-Pin USB Flash Microcontrollers with nanoWatt XLP Technology. mini USB connector status led male U...

AVR-ISP500-TINY is fast and reliable USB AVR programmer. It have two modes of work: STK500 compatible USB programmer and USB Mass storage. In ...

FEATURES Allwinner A20 dual core Cortex-A7 processor, each core typically running at 1GHz and dual-core Mali 400 GPU 1GB DDR3 RAM memory 4GB NAND...