schede & micro

The SparkFun Little Soundie is a fun and easy-to-use audio playback device breaking out the VS1000D audio codec IC allowing this little board ...

Multiplexer has a set of interfaces for a variety of multi-function adapter plates. It supports USB, TTL, RS232, RS485 interfaces between the syst...

Introducing the 3.3V SparkFun FT231X Breakout board, complete with the full UART hardware handshake feature! The pin-out of this board matches the ...

If you have more than 32 devices on your DMX cable, you need to provide a Splitter/Buffer to maintain the DMX signal quality. This 4 Way Optically ...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC o...

Hear the good news! This speaker is a great addition to any audio project where you need a 4 Ohm impedance and 3W or less of power. At 40mm diamete...

Make some noise with your next project! The MP3 Trigger board is built to make MP3 sound integration easier than ever. The board has 18 external tr...

The iceFUN module is powered from USB or an external 5v supply. There are on-board 3.3v and 1.2v regulators. All PIC and FPGA I/O pins are 3.3v...

The credit-card-sized computer has become even smaller! The Raspberry Pi Zero W is still the Pi you know and love, but at a largely reduced size of...

Are you a Java developer looking to add advanced hardware I/O capabilities to your Android or PC application? Well then the IOIO-OTG is for you! Th...

A20-SOM-EVB is reference design on 2 layer board for A20-SOM which adds VGA, HDMI, Audio In/Out, LCD, 2 Mpix Camera, Gigabit Ethernet, SATA, USB-OT...

Powered and Controlled from the USB bus.Relays - 6 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

For applications that require a ton of outputs, this module is the one you're looking for. With sixteen PWM-enabled relay outputs, it can be used t...

Controlled over WIFI using preprogrammed command sets or html page. The ESP32LR20 is a WIFI connected relay module using the popular ESP32. It prov...

OPEN SOURCE HARDWARE EMBEDDED MIPS LINUX SINGLE BOARD COMPUTER WITH RT5350F SOC 2.4GHZ WIFI 801.11N 150MB X5 100MB ETHERNET PORTS FEATURES 360 MH...

dS378 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the dS378 mo...

This simple board breaks out the power, USB 2.0 data, configuration, and sideband pins of a USB Type-C connector to a 0.1″ spacing that is compatib...

Make your own mini MIDI synth with DSP-G1 Voice Chip analog modeling synthesizer by Jan Ostman at DSP Synthesizers. It's a tiny LPC810 chip program...

Simple configuration and setup from your web browser.Control it from a web page, or select tcp/ip control with an option of ASCII, Binary or Modbus...

Powered and Controlled from the USB bus.Relays - 4 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

Take control of and monitor your world with our ultimate jack-of-all-trades Raspberry Pi HAT! We've pulled together a great set of features into th...

This is a simple breakout board for Analog Device's AD5330 8-bit digital-to-analog converter (DAC). The AD5330 has a parallel interface, and can op...

The HydraNFC is a NFC shield hardware to sniff, read/write or emulate any 13.56MHz NFC tags (with the help of direct modes) for anyone interested ...