Gyro Breakout Board - IXZ500 Dual 500°/s

This is a breakout board for the dual axis IXZ-500 gyro. The IXZ-500 is a very small gyroscope, designed to sense angular velocity on the x and z axes (pitch/yaw). The gyro features a primary output with a ±500°/s full scale range, for measuring higher speed motions, and has a secondary output with a ±110°/s full-scale range, for sensing more precise movements.  These dual outputs allow the system designer to use an analog-to-digital-converter (ADC) with two fewer bits, saving overall system cost.

This breakout board includes the IXZ-500 and all components as shown - a 2.8VDC LDO voltage regulator, and filtering components. All necessary pins of the IXZ-500 are brought out to a 9-pin 0.1" pitch header.

Not sure which gyro is right for you? Our Accelerometer and Gyro Buying Guide might help!

Features:

• IXZ-500 Dual Axis Gyroscope
• On-board 2.8VDC voltage regulator
• All necessary filtering components
• Pins broken out to a 0.1" pitch header
• Integrated X- and Z-axis gyros on a single chip with in-plane mounting
• Two separate outputs per axis for higher speed motions and lower-speed precise movements:
  • 500°/s full scale range (higher speed)
  • 110°/s full scale range (high precision)
• Integrated amplifiers and low-pass filters
• Auto Zero function for bias calibration
• On-chip temperature sensor

Dimensions:

• Board: 0.65x0.9"

Documents:

• Schematic
• IXZ-500 Datasheet
• Wiring Example (IXZ-500)