Salta il contenuto

Lingua

SKU 193136

3136 - Button Load Cell (0-50kg) - CZL204E

Prezzo originale €68,04 - Prezzo originale €68,04
Prezzo originale
€68,04
€68,04 - €68,04
Prezzo attuale €68,04

Tutti i prezzi sono IVA inclusa

Disponibilità:
in magazzino
Richiesta Sconto per Quantita' e Informazioni

 

Product Features

Product Description

A load cell is a force sensing module - a carefully designed metal structure, with small elements called strain gauges mounted in precise locations on the structure. Load cells are designed to measure a specific force, and ignore other forces being applied. The electrical signal output by the load cell is very small and requires specialized amplification. Fortunately, the 1046 PhidgetBridge will perform all the amplification and measurement of the electrical output.

This Button Load Cell is used in applications that require a thin form factor. The bottom of the load cell is bolted, and force applied to the button on the top. By loading only the button, which is slightly rounded, the load cell is less sensitive to errors resulting from the load not pushing down exactly straight on the load cell.

Product Specifications

Sensor Properties

Sensor Type Compression Load Cell
Weight Capacity Max 50 kg
Maximum Overload 60 kg
Creep 20 g/hr
Zero Balance ± 500 g
Cell Repeatability Error Max ± 100 g
Cell Non-Linearity Max 100 g
Temperature Effect on Span 2.5 g/°C
Temperature Effect on Zero 2.5 g/°C

Electrical Properties

Rated Output 1 mV/V
Rated Output Error Max 40 μV/V
Output Impedance 350 Ω
Supply Voltage Max 5 V DC

Physical Properties

Compensated Temperature Min -10 °C
Compensated Temperature Max 40 °C
Operating Temperature Min -20 °C
Operating Temperature Max 55 °C
Cable Length 3 m
Cable Gauge 30 AWG
Material Aluminium Alloy & Alloy Steel
Screw Thread Size M3


 

Resources

The Data Sheet below has a comprehensive glossary that describes in practical terms the meaning and usefulness of the specifications.

Warning

warning Make sure to calibrate your load cell before using it. You can find information on how to calibrate the cell in the 3136 Datasheet. You should also look at the 1046 – PhidgetBridge Product Manual.

Connection

The 3136 connects to a bridge on the 1046 – PhidgetBridge 4-Input



FUNCTIONAL

The following table shows how to connect the Load Cell Wires to the bridge connectors.

Wire Color Red Green White Black/Yellow
Bridge Connector 5V + - GND


Wiring