Sensori

Thermocouple connector Uses MAX6675ISA UEXT connector FR-4, 1.5 mm, soldermask, component print Dimensions: 22x18mm (0.9 x 0.7") HARDWARE MOD...

THERMOCOUPLE K-TYPE SENSOR -50+700C

The GP2Y0A21 Sharp distance sensor is a great way to add obstacle avoidance or motion sensing to your robot or any other project. The detection r...

MPU6050 is MEMS 3-axis gyroscope and a 3-axis accelerometer on the same silicon die together with an onboard Digital Motion Processor™ (DMP™) capab...

Temperature sensor for temperatures in range -30+110C with 1% precision. Perfect for measuring of fluids, air temperature, refrigrrators, freezers,...

This is a passive electrode for a SHIELD-EKG-EMG shield which allows Arduino like boards to capture Electrocardiography Electromyography signals. T...

FEATURES MRF24J40 + PIC18F26K20 with open source MiWi and Zigbee stack PIR sensor motion detector, sends wireless alarm to Zigbee nodes when moti...

  With this module you can sense Earth's magnetic field, to detect burried metals, make compass module and much more. FEATURES: MAG3110 3 axis...

BMP085 is barometric pressure digital sensor which measures pressure in range 300..1100hPa (+9000m .. -500m above sea level) BMP085 is with I2C int...

MOD-TC-MK2-31855 is an upgrade over MOD-TC in a lot of ways. It comes with firmware allowing easier I2C interfacing to host boards via simple UEXT ...

HMC5883L is 3-Axis Digital Compass with 12-bit ADC that enables 1° to 2° compass heading accuracy. HMC5883L usses I2C communication interface and c...

MOD-MPU9150 is 9-axis motion tracking device with 3-axis gyroscope, 3-axis accelerometer and 3-axis magnetometer in small 4x4 mm package Possible a...

Dielectric strength 1000VAC/MIN  Rated input current:0-100A Output: 0-50mA or 0-1V Opening size: 13mm×13mm Non-linearity±3% (10%-120% rated input...

Sometimes the touch screen cover of the 7'' displays with A13-LCD7 and A13-LCD7-TS gets damaged (you might accidentally paint it or scratch it). In...

PROFESSIONAL EKG-EMG CABLE WITH SNAP CONNECTOR FOR GEL ECG ELECTRODES

MOD-BME280 is combined humidity, temperature and pressure sensor module based on Bosch BME280 sensor. It has two digital interfaces: I2C (up to 3.4...

DS18B20 is digital factory calibrated temperature sensor with 1-wire interface Cable length 100 cm Water proof encapsulated in stainless steel 6x...

PROFESSIONAL STICKY ECG GEL ELECTRODES

FEATURES Operating voltage: DC 2.7-12V;  Static power consumption: <0.1mA;  Delay time: 2 seconds;  Block time: 2 seconds;  Trigger mode: repe...

  3-axis digital accelerometer board with UEXT connector. Based on SMB380 from Bosch. FEATURES: SMB380 digital 3-axis accelerometer from Bosch...