Sensori

A gyroscope is a type of sensor that can sense twisting and turning motions. Often paired with an accelerometer, you can use these to do 3D motion ...

Model: FM1108 IC S50 ● Resonance Frequency: 13.56MHZ ● Memory: 8K Bit EEPROM memory ● Operating temp.range: -10°C - 50°C

This is your simple three conductor sensor cable with electrode pad leads. These cables are 24" long and feature a 3.5mm audio jack connector on on...

This is a passive electrode for a SHIELD-EKG-EMG shield which allows Arduino like boards to capture Electrocardiography Electromyography signals. T...

    This is a simple-to-use hydrogen gas sensor, suitable for sensing hydrogen concentrations in the air. The MQ-8 can detect hydrogen gas concentr...

Offering equally impressive performance to the CMPS12, but also allowing background calibration to be disabled and operation with a fixed calibra...

The CMPS12 is our 4th generation tilt compensated compass. Employing a 3-axis magnetometer, a 3-axis gyro and a 3-axis accelerometer. At the core o...

Component Overview   Cost-effective solution where precision range-findings are needed Sensor component allows users to lower the cost of their sy...

This is a piezoresistive force sensor. The harder you press, the lower the sensor's resistance. Pressing hard, the resistance changes from infinite...

If you need to add user input without using a button, then a capacitive touch interface might be the answer. The AT42QT1010 Capacitive Touch Breako...

Current transformers (CTs) are sensors that are used for measuring alternating current. They are particularly useful for measuring whole building ...

  Now mounted on a breakout board, the MPL115A1 is a digital barometric pressure sensor that uses MEMs technology to give accurate pressure measure...

The 1143 Light sensor can measure ambient light up to 70 kilolux (roughly equivalent to the brightness of direct sunlight). Each sensor has been in...

Component Overview   Cost-effective solution where precision range-findings are needed Sensor component allows users to lower the cost of their sy...

  With this module you can sense Earth's magnetic field, to detect burried metals, make compass module and much more. FEATURES: MAG3110 3 axis...

  This is a simple-to-use liquefied petroleum gas (LPG) sensor, suitable for sensing  LPG (composed of mostly propane and butane) concentrations in...

  Product Features Maximum Load Capacity: 200 kg Wheatstone Bridge Sensor Individually calibrated at the factory Plugs into the 1046 – PhidgetB...

This is a breakout board for the ultra low-power LIS331HH three axis linear accelerometer. The device has a digital I2C/SPI serial interface which...

  Product Features Maximum Weight: 50 kg Wheatstone Bridge Sensor Individually calibrated at the factory Plugs into the 1046 – PhidgetBridge 4-...

Temperature sensor with a range of -50°C to +150°C with a typical error of ±0.75°C in the 0°C to 100°C range.   Comes packaged with a 60cm Sensor ...

This is the T5403 breakout board, a fully calibrated barometric pressure sensor with an I2C interface. The T5403 sensor measures the absolute press...

BMP085 is barometric pressure digital sensor which measures pressure in range 300..1100hPa (+9000m .. -500m above sea level) BMP085 is with I2C int...

The VL6180X (sometimes called the VL6180) is a Time of Flight distance sensor like no other you've used! The sensor contains a very tiny laser sour...

This force-sensing linear potentiometer (FSLP) from Interlink Electronics is a passive component with resistances that depend on the magnitude and ...