Sparkfun

These headers are made to work with the Arduino Main Board, Arduino Pro, and the Arduino Mega. They are the perfect height for clearing the USB-B c...

This is a simple two wire cable. It has bare wires on both ends with a Molex A and B connector in the middle. With thicker 18 AWG wire, it\'s bette...

This is a simple six wire cable. Great for jumping from board to board or just about anything else. There is a 6-pin Molex connector with 0.1\" spa...

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1\" spa...

This is a simple four wire cable. Great for jumping from board to board or just about anything else. There is a 4-pin JST connector on one end, bar...

This is a simple three wire cable. Great for jumping from board to board or just about anything else. There is a 3-pin JST connector on one end, ba...

This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin JST connector on one end, bare...

This is a simple 4 cell AA battery holder. The 5 inch cable is terminated with a standard 5.5x2.1mm, center positive barrel jack connector. The c...

This is a 3-pin, through-hole PH series JST connector. The pins are spaced by 2mm. We really like the solid locking feeling and high current rati...

This is a 2-pin, through-hole PH series JST connector. The pins are spaced by 2mm. We really like the solid locking feeling and high current rati...

This is a black insulated binding post. These binding posts *do* accept banana plugs, and are a great way to connect single-wire leads. The colored...

This is a red insulated binding post. These binding posts *do* accept banana plugs, and are a great way to connect single-wire leads. The colored c...

This is a 5g syringe of white heatsink compound (aka thermal grease, thermal paste, thermal goo). Use this whenever you\'re connecting a component ...

This beefy heatsink is designed to dissipate a lot of heat! The 6400BG heatsink fits TO-220, TO-218, TO-247, and Multiwatt packages - which means i...

**Description**: Ever wonder what goes on inside these things? Well this clear bread board might enlighten. Beyond the clear plastic, this is r...

This 2xAA battery holder puts a nice finishing touch on your battery powered project. This holder features a removable, sliding cover, which is sec...

The BPW34 is a tiny, general purpose [PiN photodiode](http://en.wikipedia.org/wiki/PIN_diode). This photodiode has a ton of uses, one of which is t...

Looking to add MIDI to your project? This is a female, 5-pin, right-angle DIN 5/180? connector which will interface with most standard MIDI cables....

This simple cable has so many uses! Plug the 9 volt battery clip onto a standard 9V battery and connect the other end to anything with a 5.5x2.1mm,...

This is a right-angle, 24-pin Molex Mini-Fit Jr.™ connector, commonly used as the power supply connector on [ATX](http://en.wikipedia.org/wiki/ATX#...

This is a SparkFun exclusive! These are 12\" long, 26 AWG jumper wires terminated as female to female. Use these to jumper from any male header on ...

This is a SparkFun exclusive! These are 12\" long, 26 AWG jumper wires terminated as female to female. Use these to jumper from any male header on ...

This is a SparkFun exclusive! These are 12\" long, 26 AWG jumper wires terminated as male to male. Use these to jumper from any female header on an...

This is a SparkFun exclusive! These are 12\" long, 26 AWG jumper wires terminated as male to male. Use these to jumper from any female header on an...