PM42L-048-17 950g-cm Unipolar Stepper

This is the motor you want if you are looking for a low cost unipolar stepper that needs to do some work.

Motor Controller and Connection

The 3314 stepper motor connects to:

• 1062 - PhidgetStepper Unipolar 4-Motor
• 1063 - PhidgetStepper Bipolar 1-Motor.

The following table shows how to connect the motor wires to the 1062 board connectors to get clockwise rotation. To wire for counter-clockwise rotation, swap the Black and Blue wires.

To connect the motor to the 1063, leave out the two Red wires.

Note: Make sure to unplug the power cord from the controller board before switching wires around.

Product Features

• Good Torque
• Step angle: 7.5°
• Holding Torque: 950 g-cm @ 0.28 Amp

Product Specifications

Resources

• Wantai Data Sheet