STORE IT

These aren't kits, as much as they are an inexpensive bag of components so you can build yourself a Symet along the lines of the PMK Trimet. Basic ...

3 by 4 Keypad. (Telephone-type) You can use this 3x4 keypad to customize to your application! Size: 1,72" x 2.63" (43.8 x 66.7mm)      

  The BOT123 is a servo upgrade pack for the BOT120 (or BOT110) microbots. It includes a miniature 9g servo, two servo connector PCBs as well as an...

  Quad Operational Amplifier, low noise, High impedance JFET input. DIP14 package Datasheet

  This is the small 'serial interface' PCB that uses a PICAXE-18M2 chip to drive an LCD or OLED module (supplied as a self asssembly kit). The incl...

  The BOT120 microbot starter kit includes a line follower module. This kit is a separate, identical, line follower module that can be used to allo...

  The PICAXE Create System is based around a PICAXE-18M2 Motherboard and various input/output modules which connect to the motherboard using patent...

  Documents: Datasheet  

Description: The PICAXE-18X datalogger is an economical four channel datalogger based upon the PICAXE-18X microcontroller. This microcontroller can...

Datasheet (21K) PDF

You know servos? They have 3-wire connections: Ground / Voltage / Signal. This standard layout has been adopted by many manufacturers for periphe...

Datasheet PDF

High quality potentiometer. L = 15mm  

USB extender su cavo cat.5E

This compass module has been specifically designed for use in robots as an aid to navigation. The aim was to produce a unique number to represent t...

  The Quadstepper motor driver board allows you to control up to 4 bipolar stepper motors simultaneously using logic level IO pins. Each motor driv...

  The ProtoSnap series is a new way to prototype your project without a breadboard. Everything is wired together on a single board, which makes i...

  The LilyPad Beginner's Kit is a great way to get started with the LilyPad e-textiles platform. Using the parts in this kit you can create e-texti...

  This board is an evaluation platform for the SM130 RFID module. It includes an XBee header, PCB trace antenna, and has the layout to be used a...