USB to TTL Serial Cable (5V VCC)
Tutti i prezzi sono IVA inclusa
This is a USB to TTL Serial Cable which allows for a simple way to connect TTL interface devices to USB. The I/O pins of this cable are configured to operate at 3.3V specifically with a Raspberry Pi with each serial pin broken apart. Thanks to its separated pins, this cable is a perfect candidate for powering, connecting, and accessing the login and debug console on an older-version Raspberry Pi.
The FTDI cable is designed around an FT232, which is housed in a USB-A connector. The other side of the cable is terminated with a separated 4-pin connector with the following pinout: RX (Yellow), TX (Orange), VCC (5V) (Red), and GND (Black). A link to the FTDI drivers can be found in the _Documents_ section above.
**Note:** Please be aware that while the I/O pins in this cable
operate at 3.3V, the VCC pin is 5V. The VCC pin is NOT 3.3V like the
I/O pins.
**Documents:**
* [FTDI Drivers](http://www.ftdichip.com/FTDrivers.htm)
* [Product Video](https://www.sparkfun.com/videos#all/Nsj_4v322dU/69)