MOD-RGB - MODULE FOR CONTROLLING RGB LED STRIP

MOD-RGB is a completely open-source module suitable for controlling LED strips. The LED strips might be of the same color or different colors. The board can be controlled via I2C or DMX interfaces (led on the UEXT connector). The board has short-circuit protection and can provide up to 5A to each strip channel. Olimex provides also a full range of examples for interfacing MOD-RGB via your favorite A13, iMX233, RPi, Olimexino, etc board

FEATURES

• Based on PIC16F1503
• Examples for wide range of boards including A13, iMX233 and OLIMEXINO boards
• 3 channels with overcurrent protection
• Nominal amperage for each channel - 5A
• LEDs are controlled with output PWM @ 1KHz
• Stereo audio-in jack
• ICSP pads for uploading custom firmware
• Convenient PTH jumper for DMX/I2C mode switch
• Convenient PTH jumper for UEXT powering of device boards
• UEXT to connect to device or host microcontroller
• PCB: FR-4, 1.5 mm (0,062"), red soldermask, white silkscreen component print
• Dimensions: 62.0 x 35.5 mm (2.44x1.40")

DOCUMENTS

• MOD-RGB firmware note

HARDWARE

• MOD-RGB schematic in .pdf format
• MOD-RGB schematic and board design in Eagle format

SOFTWARE

• Firmware binary and source
• MOD-RGB and Raspberry Pi example
• MOD-RGB and OLinuXino example
• MOD-RGB and OLIMEXINO-328 example
• MOD-RGB and PIC32-PINGUINO or PIC32-PINGUINO-OTG
• MOD-RGB and OLIMEXINO-STM32