devantech

  125mm diameter wheel with 8mm aluminum hub already fitted. Fits directly on EMG49 gear motor

The EGM30 (encoder, motor, gearbox 30:1) is a 12v motor fully equipped with encoders and a 30:1 reduction gearbox. It is ideal for small or medi...

PRODOTTO FUORI PRODUZIONE, SOSTITUITO DALLA NUOVA VERSIONE     The USB-RLY02 provides two volt free contact relay outputs with a current rating o...

  Technical Specifications : Voltage Separate terminals or from servo supply when 7.2v battery is used Number of ...

  The RD03 is a powerfull Robot Drive system, ready to integrate into your robot, comprising of an MD49 motor drive module, two EMG49 gearmotors ...

The SRF06 is a low cost ultrasonic ranger with a 4-20mA current output. The SRF06 is powered from the 4-20mA current loop and requires no other p...

Number of Relay's - 8 Power - 5v @ 100mA max. Control interface - Serial or I2C Re...

    Servo Channels - up to 84 Logic Outputs - up to 84 Logic Inputs - up to 84 10-bit Analogue Inputs - up to 36 Servo Refresh...

Based around the fantastic BNO055 9 axis absolute orientation sensor from Bosch our module offers supply regulation and comms level translation, th...

The BT004 provides four volt free contact relay outputs with a current rating of up to 16Amp each controlled over a HC06 Bluetooth serial port. The...

The BT004BLE provides four volt free contact relay outputs with a current rating of up to 16Amp each controlled over a HM10 Bluetooth serial port. ...

This compass module has been specifically designed for use in robots as an aid to navigation. The aim was to produce a unique number to represent t...

The CMPS12 is our 4th generation tilt compensated compass. Employing a 3-axis magnetometer, a 3-axis gyro and a 3-axis accelerometer. At the core o...

Offering equally impressive performance to the CMPS12, but also allowing background calibration to be disabled and operation with a fixed calibra...

  Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8" r...

  Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8" r...

  Picmicro develop module, DIL format with Microchip USB HID bootloader preloaded. The module can be used on veroboards. Specifications 0.8" r...

If you have more than 32 devices on your DMX cable, you need to provide a Splitter/Buffer to maintain the DMX signal quality. This 4 Way Optically ...

The DMX-USB-RX-A8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 18VAC sup...

The DMX-USB-RX-D8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC or ...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC o...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC o...

The DMX-USB-RX-RLY8 module is a fully compliant with the latest USITT DMX512-A standard, E1.11-2004. This small module, powered by a single 9V AC o...