Solarbotics

Practically identical to the now-defunct GM12 Sanyo NA2S, this gear motor offers a bit more speed at less cost to you! The major difference betw...

The Panasonic 1381x voltage trigger detects preset voltage levels depending on the flavour you select. These are the heart of many solarengine ci...

The Panasonic 1381x voltage trigger detects preset voltage levels depending on the flavour you select. These are the heart of many solarengine ci...

The Panasonic 1381x voltage trigger detects preset voltage levels depending on the flavour you select. These are the heart of many solarengine ci...

The Panasonic 1381x voltage trigger detects preset voltage levels depending on the flavour you select. These are the heart of many solarengine ci...

Practically identical to the now-defunct GM13 Sanyo NA2S, this gear motor offers a bit more speed at less cost to you! The major difference betw...

Our SCC2433-B solar cell is a monocrystalline cell offering 4.5V (open circuit) and 18mA (short circuit) in a 24x33mm package. What really makes t...

Following the size standard of the GM11(a) series of gear motors, this 30:1 reduction unit is very quick - ideal for zippy robot applications! Co...

The Ardweeny has proven to be a very popular Arduinotm compatible microcontroller because of it's tight package and cost-effective performan...

This motor is much like the GM2 gear motor but runs at nearly twice the speed. Mechanical Features 143:1 gear reduction ratio 7mm output shaft wi...

You only need one motor per side on a tracked vehicle, but you'll need at least one idler wheel to stretch the tread 270014 e 270015 between two...

  81:1, 454RPM, 20mA (220mA stall) at 6V gives 3.17in*oz torque. Not bad, eh? And only available from Solarbotics ! These little gear motors measur...

  Originally invented by Randy Sargent, Herbie was built from spare parts as an entry for a robot competition. Herbie is such an elegant, clever de...

These aren't kits, as much as they are an inexpensive bag of components so you can build yourself a Symet along the lines of the PMK Trimet. Basic ...

You know servos? They have 3-wire connections: Ground / Voltage / Signal. This standard layout has been adopted by many manufacturers for periphe...

    The provided mounting holes in the GM2/GM8 gear motors are a convenient way to mount these to your project, but sometimes you just need a diff...

  The provided mounting holes in the GM3/GM9 gear motors are a convenient way to mount these to your project, but sometimes you just need a diffe...

This 1.7 (dia) x 0.35 (mm/thd) x 4mm long bolt exactly matches the unique thread on the two bolt-holes on the faceplates of the 420 011 - 420 012...

Looking to build the smallest, handiest, bread-board friendly Arduino-compatible? The Ardweeny fits on the back of the included ATmega328, taking...

  The K BB-Proto makes use of the expansion port on the new "Version 2" brainboards for the Sumovore and ScoutWalker III. By simply plugging it ...

These new hard plastic wheels are specially designed for our SBGM2, SBGM3, SBGM9 gear motor output shafts. Although usable as wheels, we often use ...

This 224:1 gearmotor (gearbox with brushed DC motor) has a low-current motor and provides power and speed that is comparable to an RC servo at a fr...

This 224:1 gearmotor (gearbox with brushed DC motor) has a low-current motor and provides power and speed that is comparable to an RC servo at a fr...

The GM8 is essentially a 143:1 version of the GM2 gearmotor. If you want a bit more speed than what the GM2 will give you, this is the motor for yo...