Sparkfun

This is a handy AVR programming cable that incorporates both the 10-pin and 6-pin ISP programming interfaces. Cable is about 12\" long and mates...

Note - Please read before purchasing! The SARA-R5 module in the AWS IoT ExpressLink SARA-R5 Starter Kit accepts the simplified AWS IoT ExpressLink ...

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pai...

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. High quality coax cable with...

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. High quality coax cable with...

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black ...

These are 12\" long cables terminated with banana plugs. Pretty standard, right? Wrong! These right angle banana plugs were specifically made to be...

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black pai...

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black ...

These are various leaded cables for attaching to multimeters, power supplies, oscilloscopes, function generators, etc. Cables come in red/black ...

The Touch Board from [Bare Conductive](http://www.bareconductive.com/about/) is an easy-to-use Arduino@Heart board that gives you the ability to tu...

The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI int...

This is a simple cable that adapts from a USB port to a 5.5x2.1mm barrel connector, center positive. This cable allows the user to use a USB port o...

Do you fear that your power may not be \"far reaching\" enough? How would another 3\' work for you? Okay, so it doesn\'t sound very dramatic, but s...

Do you fear that your power may not be \"far reaching\" enough? How would another 6\' work for you? Okay, so it doesn\'t sound very dramatic, but s...

We use barrel jacks a lot around here and sometimes we need to pop a switch into the mix. That usually means hacking up a perfectly good barrel jac...

Two pin JST connector to a 2.1x 5.5mm barrel jack, 6.25 inch long jumper cable. We use this cable to adapt from a wall power supply to a relatively...

This is a 16 character by 2 line display that runs at 3.3V. Utilizes the common ST7066/HD44780 parallel interface ([datasheet](http://www.sparkfun....

This is a basic 16 character by 2 line display. Black text on Green background. Utilizes the extremely common HD44780 parallel interface chipset ([...

This is similar to other 16x2 character LCDs that you\'ve seen before but with one vibrant difference: The backlight is actually an RGB LED. This m...

This is a basic 16 character by 2 line display with a snazzy black background with white characters. Utilizes the extremely common HD44780 parallel...

This is a basic 5V 16 character by 2 line OLED display with yellow text on a black background. OLEDs (Organic Light Emitting Diode) differ from LCD...

This is a PCB mount clip to hold a 18650 Lithium Ion Cell battery. Each battery holder is sold in single units, you\'ll need two for each battery. ...

This is an incredibly simple one cell 18650 Battery Holder. When someone thinks of 18650 Cells they tend to think of flashlights first, which is fa...