sparkfun

This simple board breaks out a micro-B USB connector's VCC, GND, ID, D- and D+ pins to a 0.1" pitch header. If you want to add the popular micro-B ...

  This new version now has all 5 pins broken out on the connector. We have no idea what USB device you are hooking up to, but if you need to add a ...

This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1\" standard spacing d...

These analog (RH) British Telecom connectors are primarily used by our English friends across the pond but here at SparkFun we like to use them for...

These digital (LH) British Telecom connectors are primarily used by our English friends across the pond but here at SparkFun we like to use them fo...

This is an industrial grade DC Buck-Boost converter that inputs 8V to 36V and outputs 12V up to 6A or 72W. With plenty of heatsinking and protectio...

The Bus Pirate v3.6a, created by [Ian Lesnet](http://dangerousprototypes.com/), is a troubleshooting tool that communicates between a PC and any em...

This is an interface cable for the [Bus Pirate](http://www.sparkfun.com/commerce/product_info.php?products_id=9544), designed to connect to its 2x5...

This a simple breakout board for the button pads. Each LED and button is brought out to the side connectors. The connectors are soldered to the bac...

This a simple breakout PCB for our [2x2 silicone button pads](https://www.sparkfun.com/products/7836). Each LED and button is brought out to the si...

This is a translucent silicon rubber button pad with 4 buttons orignally inspired by the folks at [monome.org](http://monome.org). Each button has ...

This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8" ABS plastic. Using two of these bezels with two of the ...

This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8\" ABS plastic. Using two of these bezels with two of the...

This is a black plastic bezel, custom made to mate with the silicon rubber pads. Black 1/8\" ABS plastic. We use four 4/40-0.5\" size screws matche...

This a simple breakout PCB for our [4x4 silicone button pads](https://www.sparkfun.com/products/7835). Each LED and button can brought out to the s...

This is a translucent silicon rubber button pad with 16 buttons originally inspired by the folks at [monome.org](http://monome.org). Each button ha...

No, this isn\'t a tank tread, this is a 0.5m long Cable Carrier with 10x15mm bits composing its main body and two screw fasteners at each end for e...

The CAN-BUS Shield provides your Arduino or Redboard with CAN-BUS capabilities and allows you to hack your vehicle. This shield allows you to poll ...

Fingerprint scanners have been easily available at a consumer level for a number of years now, so it is only logical that they would continue to gr...

Panasonic FK SMT Aluminum Electrolytic Capacitors feature a high endurance of up to 2000 hours at +105°C and a temperature range as low as -55°C. T...

This is a very common 0.1uF capacitor. Used on all sorts of applications to decouple ICs from power supplies. 0.1\" spaced leads make this a perfec...

This is a very common 22pF capacitor. Used with crystals for loading purposes. 0.1\" spaced leads make this a perfect candidate for breadboarding a...

Keep the outdoors out of your project! This is the threaded sealing cap that fits onto the Weatherproof Panel Mount USB-B connectors. The cap maint...

  This is a simple-to-use Carbon Monoxide (CO)sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO concentrations anyw...