Olimex

BOOTABLE MICRO SD CARD WITH ANDROID IMAGE Please note: this SD card is suitable only for A10-OLinuXino-LIME

BOOTABLE MICRO SD CARD WITH DEBIAN IMAGE Please note: this SD card is suitable only for A10-OLinuXino-LIME

A10-OLinuXino-LIME is a very compact (84x60)mm Linux Open-source Hardware computer FEATURES A10 Cortex-A8 CPU 1GHz and Mali 400 GPU 512MB DDR3 R...

A generic 10 inch display with WSVGA resolution. Has a connector compatible with A13/A10 OLinuXino boards (cable is sold separately). FEATURES 10...

A13-OLinuXino is a low-cost single-board Linux computer in a very compact nano-ITX form. It uses the very first Cortex A8 processor available in eL...

A13-OLinuXino is a low-cost single-board Linux computer in a very compact form. It uses the very first Cortex A8 processor available in the eLQFP17...

Please note: this SD card image is suitable only for A13-OLINUXINO-MICRO and doesn't work with A13-OLINUXINO nor with A13-OLINUXINO- FEATURES Cl...

A13-OLinuXino is a low-cost single-board Linux computer in a very compact nano-ITX form. It uses the very first Cortex A8 processor available in eL...

A13-SOM-WIFI is System on Chip module shield which add WIFI connectivity to A13-SOM-XXX. All A13 signals are available on 0.1" holes. A13-SOM-WIFI ...

This a basic plastic enclosure for the A20-OLINUXINO-MICRO and A20-OLINUXINO-MICRO-4GB boards. It consist of two plexyglass plates, eigth M3 screws...

BOOTABLE MICRO SD CARD WITH ANDROID IMAGE Please note: this SD card is suitable only for A20-OLinuXino-LIME

BOOTABLE MICRO SD CARD WITH DEBIAN IMAGE Please note: this SD card is suitable only for A20-OLinuXino-LIME

BOOTABLE MICRO SD CARD WITH ANDROID IMAGE Please note: this SD card is suitable only for A20-OLinuXino-LIME2 and A20-OLinuXino-LIME-4GB

BOOTABLE MICRO SD CARD WITH DEBIAN IMAGE Please note: this SD card is suitable only for A20-OLinuXino-LIME2 and A20-OLinuXino-LIME-4GB

Allows easier interfacing of the A20 board by displays with VGA port connector (very useful if you lack HDMI screen). The signals from the small on...

FEATURES Parallel port JTAG dongle interface, can be used with all ARM devices for programming and debugging uses ARM's standard 2x10 pin J...

AVR-ISP500-TINY is fast and reliable USB AVR programmer. It have two modes of work: STK500 compatible USB programmer and USB Mass storage. In ...

ARDUINO Leonardo like board with ATMEGA32U4. Features: ATMEGA32U4 microcontroller, all in one USB communication no need for external FTDI chip...

A4983 driver can control stepper motors and have two channels. The board can also power gear motors. It might be supplied by voltage in the 6V to 3...

A 10-pin ribbon cable suitable for connecting an OLIMEX host board with UEXT interface to an extension board configured as device. Note that some o...

Input voltage range: (9-36)VDC Fixed output voltage: 5V or 12V selectable Screw terminal and power jack for input Screw terminal, USB-A connecto...

Allow your Raspberry Pi, A13-OLinuXino-MICRO, BeagleBone etc boards which require 5V input power supply to be powered with any adapter from 6 to 16...

DOOR-LOCK IS ELECTROMAGNETIC DOOR LOCK. IT OPERATES WITH 12V DC, WHEN POWER IS APPLIED THE DOOR LOCK PIN IS MOVING INSIDE HOUSING, WHEN POWER IS RE...