PHIDGETS

The IR Distance Adapter is designed to interface the Sharp GP2D12 sensor to the PhidgetInterfaceKit 8/8/8 or the PhidgetTextLCD.   The Sharp GP2D1...

This sensor can detect the presence of a highly reflective object at 10cm. For less reflective objects (like hands) the distance is about 5cm.   C...

The 1106 reads 0 when no force is applied. As force increases on the circular button the value increases towards 1000.   It is intended as a user...

The 1108 is a Hall-effect sensor that provides a voltage output that is proportional to the applied magnetic field. Comes packaged with a 60cm Sens...

The 1109 can be rotated 300 degrees and outputs a number between 0 and 1000 based on the shaft position. Comes packaged with a 60cm Sensor Cable. ...

The 1111 detects changes in infrared radiation that occur when there is movement by a person (or object), which is different in temperature from t...

The Slider 60 is a linear potentiometer - the resistance varies linearly with the position of the slider. SensorValue varies from 0 to1000 over t...

This miniature joystick has two axes and a pushbutton. Each axis, up/down and left/right, has a potentiometer with a center value of approximately...

The 1116 measures 3600 degrees of rotation - 10 full turns. It is typically used in Human Interface Applications such as control panels.   Comes p...

  The 1120 FlexiForce Adapter makes it easy to interface a Tekscan FlexiForce Force Sensor to your PC. Just use the cable included with the adapter...

The 1121 provides an interface to non-Phidgets resistance sensors such as: Force-Sensing Resistors (FSR), light sensors, thermistors (heat sensors...

The 1122 measures AC current up to 30 Amps and DC Current from -30Amps to +30Amps. Dual outputs allow the user to measure both the AC and DC comp...

Temperature sensor with a range of -50°C to +150°C with a typical error of ±0.75°C in the 0°C to 100°C range.   Comes packaged with a 60cm Sensor ...

Measures Relative Humidity from 10% to 95% with a typical error of ±2%RH at 55% RH. Measures Ambient Temperature in the range of -40°C to +100°C w...

The 1126 Differential Pressure Sensor is a dual ported air pressure sensor that measures the pressure difference between the two ports. It can meas...

The 1129 is a capacitive touch sensor and can detect a touch through plastic, glass, or paper. We recommend a material thickness of up to 1/2”. The...

The pH/ORP Adapter Interfaces to a pH or ORP glass electrode through a BNC connector and feeds the data to an Analog Input on a PhidgetInterface...

        With its paper-thin construction, flexibility and force measurement ability, the Thin Force sensor can measure force between almost any tw...

      The 4-20mASensors can be connected to and powered by the provided terminals on the 4-20mA Adapter board. The 1132 will measure the current ...

  The 1133 measures sound across a very wide range, with a frequency range of 100Hz to 8kHz and pressure level from 50dB to 100dB.   Product Specif...

  The 1134 - Switchable Voltage Divider is a voltage divider with switches. The switches can be used to control which resistors are used in the vol...