DFRobot

This is an underwater ultrasonic obstacle avoidance sensor specifically designed for underwater applications. It operates on a wide voltage range o...

This is an underwater ultrasonic obstacle avoidance sensor specifically designed for underwater applications. It operates on a wide voltage range...

This gold-plated IPEX MHF1 to SMA female cable(inner needle) passed the 48h salt spray test, which is durable and not easy to rust. It employs ...

This gold-plated IPEX MHF1 to SMA female connector has passed 48 hours salt spray test, which is durable and not easy to rust. It adopts RG1.13 ...

Infrared break-beam sensors are a simple way to detect motion. This IR break beam sensor works up to 50cm with a fast and stable response of ＜2m...

Ever wanted a simple way of activating your robot from across the room? We designed this remote controller to be as simple, small, and affordable s...

This IV-18 VFD tubes Clock (Energy Pillar) is a fully assembled and calibrated IV-18 VFD clock. It displays hour, minute, second. Eight digits IV...

This product includes 2-pin 2.0mm mating connector housing(10 units) and crimp pins (20 units).They work with wires ranging from 28 to 26 AWG.

This product includes 3-pin 2.0mm(0.08") mating connector housing(10 units) and crimp pins (30 units). They work with wires ranging from 28 to 26...

This product includes 4-pin 2.0mm(0.08") mating connector housing(10 units) and crimp pins (40 units). They work with wires ranging from 28 to 26...

This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each)， through-hole type shrouded header （20 units each）and crimp contact (100 units).   ...

This kit includes JST XHP-2, XHP-3 and XHP-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 unit...

Breadboard jumper wire 65 pcs pack (Male to Male header). Including 4 different length:200mm,165mm,125mm and 80mm. A must have component for breadb...

These are two pin jumpers (also called shunts) that will create an electrical connection for the 2.54mm(0.1") male pin headers. Commonly used to mo...

This is a 12" ribbon cable made of ten jumper wires with different colors. The wires can easliy be pulled apart for individual use and each wire co...

Jumper wires are one of the most important gear component for the tinkerer. Often understimated, but one of the first things to miss. If you are st...

These are 7.1"(180mm) long jumper wires terminated as male to female. Use these to jumper from any female header on any board such as Arduino pro...

Premium quality jumper wires for prototyping. Made with 26AWG multi-strand wire and sturdy male pins. Each jumper wire is approximately 210mm in le...

These are 9"(23cm) long jumper wires terminated as female to female. Use these to connect from any male header on any board such as DFRobot IO Shie...

This is a K type Thermocouple (Temperature sensor) which is very popular for 3D printers such as Ultimaker and Makerbot. You can hardly damage them...

This 2D single-line pulsed time-of-flight (ToF) LiDAR scanner can realize the scanning measurement of the environmental profile within 270 degrees...

This 2D single-line pulsed time-of-flight (ToF) LiDAR can realize the scanning measurement of the environmental profile within 270 degrees of the ...

This 2D single-line pulsed time-of-flight (ToF) LiDAR can realize the scanning measurement of the environmental profile within 270 degrees of the h...

This is a photoelectric switch that is composed of emitter and receptor.The emitter consists of a laser diode,and the laser has the characteristics...