Devantech

Utilising the fantastic AMG8833 thermopile array from Panasonic, the TPA64 offers an economical but powerful temperature imaging solution. Video a...

The TSA01 is a voltage output temperature sensor module employing Microchip's MCP9700A sensor. Specification     Operating Voltage    2.3v to ...

    Technical Specifications : Voltage 5V Current 25mA Frequency 235 Khz Range 10cm - 1.2mt Beam Width 15° Units Range reported in ...

  The USB-I2C module provides a complete interface between your PC and the I2C bus. The module is self powered from the USB cable and can supply ...

  The USB-GPIO12 is a general purpose processor module using the PIC18F14K50. This chip has a USB module built in which we have used to implement M...

The USB-ISS  Multifunction USB Communications Module provides a complete interface between your PC and the I2C bus, SPI bus, a Serial port and gen...

The USB-ISS module is an enhanced version of our low cost USB-I2C module, offering additional functionality at the same low price. Communication to...

  Overview The USB-OPTO-RLY816 provides eight optically isolated inputs and eight volt free contact relay outputs with a current rating of up to 16...

Relays - 8 Isolated Inputs - 8Power - Powered from standard USB busControl interface - USB Input Voltage - 4.5v DC to 27v DCRelay current - Up to 1...

Powered and Controlled from the USB bus.Relays - 2 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

Powered and Controlled from the USB bus.Relays - 4 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

Powered and Controlled from the USB bus.Relays - 6 with integrated snubbing of the normally open terminalsPower - Powered from standard USB bus Con...

Powered and Controlled from the USB bus.The relays used on this board are premium ultra low power 50mW coil types, this means the boards current ...

The USB-RLY16 provides eight volt free contact relay outputs with a current rating of up to 16Amp each. The processor is powered and instructed fr...

OverviewA low power version of the USB-RLY16 module, the USB-RLY16L is powered solely from the USB bus and provides eight volt free contact relay o...

The USB-RLY82 provides two volt free contact relay outputs with a current rating of up to 1Amp each. It is powered from any standard USB bus and ha...

USB-RLY82 case. Includes mounting holes for fixing to a wall or back panel. This precision snap together case includes screws for mounting the USB-...

The USB-RS485 module provides an easy to use RS485 interface by means of a Virtual Com Port on the users system. There are no command structures,...

The USB-RS485 is a complete, self powered, USB to RS485 interface working at any baud rate up to 250k baud. It features automatic bus turn-around -...

Utilising the fantastic AMG8833 thermopile array from Panasonic, the TPA64 offers an economical but powerful temperature imaging solution.   Vide...

The WIFI002 provides 2 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which c...

The WIFI008 provides 8 volt free contact relay outputs with a current rating of up to 16Amp each, the module is powered from a 12vdc supply which c...

The WIFI484 provides four volt free contact relay outputs with a current rating of up to 16Amp each, 8 digital I/O and 4 analogue inputs. The modul...

The WLED03 is a WIFI connected PWM driver for 12v LED strip lights using the popular ESP32. It provides 3 channels driving up to 3 Amps each. Power...