Generic

These 3/8"-long hexagonal female-female aluminum standoffs keep parts spaced 0.375 inches (9.5 mm) apart. They are like elongated, 3/16″-wide hex ...

These hexagonal male-female aluminum standoffs keep parts spaced 0.375" (10 mm) apart and are great for building a multi-level robot chassis. Both ...

These 3/8"-long hexagonal female-female aluminum standoffs keep parts spaced 0.375 inches (9.5 mm) apart. They are like elongated, 3/16″-wide hex ...

These hexagonal male-female aluminum standoffs keep parts spaced 0.375" (10 mm) apart and are great for building a multi-level robot chassis. Both ...

These 5/16"-long hexagonal female-female aluminum standoffs keep parts spaced 0.313 inches (7.9 mm) apart. They are like elongated, 3/16″-wide hex...

These 5/16"-long hexagonal female-female aluminum standoffs keep parts spaced 0.313 inches (7.9 mm) apart. They are like elongated, 3/16″-wide hex...

These 7/16"-long hexagonal female-female aluminum standoffs keep parts spaced 0.438 inches (11 mm) apart. They are like elongated, 3/16″-wide hex ...

This 130-size brushed DC motor has a recommended operation voltage of 3 – 12 V and is used in the larger Pololu plastic gearmotors. Approximate sp...

330 uF, 35 V radial electrolytic capacitor. We use these capacitors for power filtering/noise suppression on our Dual VNH2SP30 and VNH3SP30 motor ...

This crimping tool can be used to crimp both male and female versions of our JST RCY connector crimp pins, JR crimp pins, Futaba J crimp pins, and ...

This crimping tool can be used to crimp both male and female versions of our Tamiya connector crimp pins, mini Tamiya connector crimp pins, JST RCY...

This connector adapts a 5.5 × 2.1 mm DC barrel jack to a pair of screw terminals spaced approximately 5 mm (0.2″) apart. The terminals are labeled...

This connector adapts a 5.5 × 2.1 mm DC barrel plug to a pair of screw terminals spaced approximately 5 mm (0.2″) apart. The terminals are labeled...

This is a standard PCB-mountable barrel-type jack for DC power adapters with 2.1 mm center holes. This is a standard PCB-mountable barrel jack for ...

This pack contains everything you need to add up to three female Futaba J connectors — the connectors found on many Futaba servos — to custom cable...

This pack contains everything you need to add up to three male Futaba J connectors — the connectors that mate with those found on many Futaba servo...

This monochrome white OLED display features a standard SH1106 SPI interface and a 128×64-pixel resolution. With an active area measuring 1.3″ diago...

This 0.05" diameter, 1.75" long by 0.6" wide flat-ended hex key works with small hex screws, such as the #4-40 set screws included with some of our...

IDC socket 2.54mm 6-pin (with strain relief clip) for use with 2×3-pin shrouded male header. These connectors can be crimped onto ribbon cable to m...

This pack contains everything you need to add up to three female JR connectors — the connectors commonly found on generic RC servos — to custom cab...

This pack contains everything you need to add up to three male JR connectors — the connectors that mate with those commonly found on generic RC ser...

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. ...

This JST RCY plug is also referred to as a BEC (battery eliminator circuit) connector and is commonly used with battery packs for RC applications. ...

This female JST RCY plug, also called a BEC connector, has 10 cm 20-AWG leads with stripped and tinned terminations. The connector is keyed so tha...