1011 - PhidgetInterfaceKit 2/2/2
Tutti i prezzi sono IVA inclusa
Product Features
- Dongle Size
- 2 Analog Inputs with configurable data acquisition rates
- 2 Digital Inputs with hardware noise filtering
- 2 Digital Outputs
- Plugs directly into a computer's USB Port
Product Description
Designed for customers who only need a couple of Analog Inputs, Digital Inputs or Digital Outputs, the dongle size PhidgetInterfaceKit 2/2/2 is ideal for projects where space is critical.
To keep the board small, we have removed the connectors from the board and brought them out through a 12-Wire cable.
Analog Inputs
The Analog Inputs are used to measure continuous quantities, such as temperature, humidity, position, pressure, etc. Phidgets offers a wide variety of sensors that can be plugged directly into the 1011's female cable connector using the cable included with the sensor.
Sampling rates can be set at 1ms, 2ms, 4ms, 8ms and multiple of 8ms up to 1000ms.
Digital Inputs
The Digital Inputs have a Digital Input Hardware Filter to eliminate false triggering from electrical noise. They can be used to convey the state of devices such as push buttons, limit switches, relays, and logic levels.
Product Specifications
| Characteristic | Value |
|---|---|
| Board | |
| USB Voltage | 4.75 to 5.25 VDC |
| USB-Power Current Specification | Max 500 mA |
| Quiescent Current Consumption | 20 mA |
| Available External Current (source) | 480 mA |
| Analog Inputs | |
| Impedance | 900K ohms |
| SV Reference Error | Max 0.5% |
| Update Rate | 1000 samples/second max |
| Digital Inputs | |
| Pull-Up Resistance | 15K ohms |
| Low Voltage (True) | 0.8V Max |
| High Voltage (False) | 2.1V Min |
| Maximum Voltage | ±15V |
| Update Rate | ~125 samples/second |
| Digital Outputs | |
| High Level Source Current | 80mA Max |
| Low Level Sink Current | 150mA Max |
| Series Resistance | 300 ohms |
| Update Rate | ~125 samples/second |
| Operating Temperature | 0 - 70°C |
Digital Outputs
The Digital Outputs can be used to drive LEDs, solid state relays (such as the 3052 SSR Relay Board), transistors; in fact, anything that will accept a CMOS signal.
Comes packaged with:
- A 3013 – 12-Wire Custom Cable
Wire Assembly
Wires 1,2,3 and wires 7,8,9 end with a female connector designed to take the Phidget sensor cable. The other wires are loose.
ResourcesCode Samples For This Product
